4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0
2 layers112.6 × 42.6 mm
Model S
Crane1195/Model-S8A circuit board for custom fightsticks.
- Size
- 112.6 × 42.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 52
- Pads
- 276
- Tracks, vias
- 771, 129
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2021
- Updated
- 5 Mar 2022
Overview
Model S is an open-source printed circuit board by Crane1195, from the Crane1195/Model-S repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 112.6 × 42.6 mm with 48 parts on 52 nets, routed with 771 tracks and 129 vias.
It is built around the ATMEGA32U4-AU, TPS61230DRC and TS3USB30ERSWR-MS, with the MBR120 and BSS138 among its other parts. Its parts include 15 capacitors, 9 resistors, 7 connectors, 3 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPS61230DRC
VSON-10-EP(3x3)-40℃~+125℃ 1 2.3V~5.5V 2.5V~5.5V 2MHz 4A 60uA Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTS3USB30ERSWR-MS
UQFN-10(1.4x1.8)UQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSMSKSEMIAnalog Switches, Multiplexers
MBR120
SOD-123Schottky DiodesDoeshare
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdModel-S
This circuit board is a complete solution for making custom all digital GameCube controllers without soldering.
Features
- Connects to GameCube/Wii/GCC to USB adapter using the USB-C to GameCube cables that are sold on the Frame1 and the B0XX websites
- Connect buttons with screw terminals or 2.54mm pitch through holes
- Easily connect to a Brook Board to use the controller on PlayStation/Xbox/other consoles, with both boards sharing the Model S USB-C port
- Can be powered with just 3.3V, allowing the board to work on Mayflash adapters without the gray USB cable as well as GameCube/Wii consoles with faulty rumble lines
Resources
User Manual - https://www.craneslab.xyz/manuals/s
Firmware - https://github.com/Crane1195/CL-FW
Questions - https://craneslab.xyz/discord
License
This project is licenced under the GNU GPL Version 3. See the included LICENSE file for details.
Support my work
I set up a donation link for people who appreciate my work and wish to donate. Donations are greatly appreciated, but are far from necessary:
https://www.paypal.com/donate/?hosted_button_id=NFDEML5FKR8N8
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9, C10, C11, C14 |
| 5 | 10k | Model_S:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R9 |
| 4 | 22uF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5 |
| 2 | , | ||
| 2 | 22 | Model_S:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 22pF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | LOGO | Footprints:logo | G***, G*** |
| 2 | MBR120 | Model_S:D_SOD-123 | D1, D2 |
| 1 | 100k | Model_S:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10nF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1uF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 1uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 4.7uF | Model_S:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 402k | Model_S:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ATmega32U4-AU | Model_S:TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | BSS138 | Model_S:SOT-23 | Q1 |
| 1 | Brook Header | Model_S:PinHeader_2x10_P2.54mm_Vertical | J6 |
| 1 | I/O Pin Headers | Model_S:PinHeader_2x23_P2.54mm_Vertical | J5 |
| 1 | I/O Screw Terminals | Model_S:24PinScrewTerminal | J7 |
| 1 | ICSP | Model_S:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | SW_PUSH | Model_S:SW_SPST_TL3342 | SW1 |
| 1 | TPS61230DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U1 |
| 1 | TS3USB30ERSWR | Model_S:UQFN-10_1.4x1.8mm_P0.4mm | U2 |
| 1 | USB-C Port | Project_Pico:Crane_USBC | J1 |
| 1 | USB4Pin | Model_S:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USBFeedThrough | Model_S:USB_A_Female_UE27AC54100 | J2 |
| 1 | XTAL_GND | Model_S:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | X1 |
The 44 most common of 48 parts.
Questions
How big is the Model S PCB?
It measures 112.6 × 42.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Model S use?
48 parts, built around the ATMEGA32U4-AU, TPS61230DRC, TS3USB30ERSWR-MS and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Model S KiCad files?
From the Crane1195/Model-S repository on GitHub, at the commit this page was made from: the board is src/Model-S.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Model S design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers136.3 × 71.1 mm
- 4 layers79.5 × 20 mm
Matter usb switch
IvanVeloz/smart-usb-plug
A smart plug for USB with energy measurement and Matter over Thread support
65 parts2GPL-3.0 - 4 layers50 × 79.5 mm
GD32-Devboard
ConnorRigby/GD32-Devboard
Simple GD32F405 Development board with CAN, SD Card, Lora, BLE and GPS
106 parts - 8 layers50 × 50 mm
- 2 layers164.1 × 47 mm
SimulTypeHeaderUltra
12voltman/SimulType
A collection of keyboard layouts and designs that emphasize data input through two handed use of the number pad with a keyboard or arrow keys
79 partsCC0-1.0 - 4 layers43.6 × 32.9 mm
Wii reg
Gmanmodz/RVL-Power-Management-System
A complete battery management and custom regulator system for a Wii portable
94 parts77 - 2 layers118 × 67 mm
Coloryr
Coloryr/ColorAudio
通用耳放，目前支持： - 音乐播放 - MP3音频解码，信息显示 - FLAC音频解码，信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit，只能设置一种采样大小) - UAV2 (最大192K 32bit，支持多种采样大小)
241 parts2GPL-3.0