4 layers68 × 42 mm
LegSensorBoard
craftit/DogBotV4Electronics
Schematics for parts for the latest version of dogbot
76 partsMIT
2 layers34 × 34 mm
AngleSensorBoard
craftit/DogBotV4ElectronicsSchematics for parts for the latest version of dogbot
- Size
- 34 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 11
- Pads
- 34
- Tracks, vias
- 65, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2021
- Updated
- 16 Jan 2021
Overview
AngleSensorBoard is an open-source printed circuit board by craftit, from the craftit/DogBotV4Electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 34 × 34 mm with 14 parts on 11 nets, routed with 65 tracks and 23 vias.
It is built around the TLE5012BE1000FUMA1. Its parts include 3 connectors, 2 capacitors, 2 resistors, 1 IC and 1 diode.
Main components
1README
README.mdDogBotV4Electronics
Schematics for parts for the latest version of dogbot
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Controller | Connector_Molex:Molex_Micro-Latch_53254-0770_1x07_P2.00mm_Horizontal | J2 |
| 1 | Index | Connector_Molex:Molex_Micro-Latch_53254-0370_1x03_P2.00mm_Horizontal | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | Logo:LOGO | G1 |
| 1 | TLE5012BE1000FUMA1 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Temp | Connector_Molex:Molex_Micro-Latch_53254-0270_1x02_P2.00mm_Horizontal | J1 |
Questions
How big is the AngleSensorBoard PCB?
It measures 34 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AngleSensorBoard use?
14 parts, built around the TLE5012BE1000FUMA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AngleSensorBoard KiCad files?
From the craftit/DogBotV4Electronics repository on GitHub, at the commit this page was made from: the board is PCBs/AngleSensorBoard/AngleSensorBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AngleSensorBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from craftit/DogBotV4Electronics
2- 2 layers15.5 × 16 mm
KneePositionSensor
craftit/DogBotV4Electronics
Schematics for parts for the latest version of dogbot
14 partsMIT
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
