
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Breakout board for Nordic NRF52840 MCU
NRF52840 Breakout is an open-source printed circuit board by cracked-machine, from the cracked-machine/NRF52840_Breakout repository on GitHub. It is a 4-layer board of 77.3 × 26.4 mm with 40 parts on 77 nets, routed with 130 tracks and 0 vias.
It is built around the PRTR5V0U2X. Its parts include 23 capacitors, 6 connectors, 2 crystals, 1 IC and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the nRF52 and nRF5x boards of this library.
Simple dev board for NRF52840 MCU, breaks out all pins to the board.
Antenna options to be confirmed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C22, C25 |
| 4 | 12pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14, C15, C26, C27 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12, C23 |
| 3 | Jumper_NO_Small | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | JP1, JP2, JP3 |
| 2 | 120R | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | FB1, FB2 |
| 2 | Conn_01x28 | Connector_PinHeader_2.54mm:PinHeader_1x28_P2.54mm_Vertical | J3, J4 |
| 1 | 0.5pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17 |
| 1 | 0.8pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | 2x5 IDC | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | 32.768 KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 4.7nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | Antenna | PCB_Antenna:Nordic_2_4GHz_Meander_RightSided | AE1 |
| 1 | Conn_01x02 | Connector_Coaxial:MMCX_Molex_73415-1471_Vertical | J5 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SMA Antenna | Connector_Coaxial:MMCX_Molex_73415-1471_Vertical | J6 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.






0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements

ph-design/PH60-SC
A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.
It measures 77.3 × 26.4 mm and has 4 copper layers, 1.6 mm thick.
40 parts, built around the PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cracked-machine/NRF52840_Breakout repository on GitHub, at the commit this page was made from: the board is NRF52840_Breakout/NRF52840_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cracked-machine before reusing the design.