2 layers27.9 × 15.2 mm
NegativeDCBreadboardAdaptor
rhinocerose/breakout-boards
Some small adapter boards to help with prototyping SMT packages on a breadboard.
7 parts1
2 layers83.3 × 164.5 mm
GuitarPLLSynthEffect
cracked-machine/GuitarPLLSynthEffectGuitar triggered PLL Synth effect
- Size
- 83.3 × 164.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 97
- Pads
- 257
- Tracks, vias
- 589, 49
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Mar 2018
- Updated
- 12 Mar 2023
Overview
GuitarPLLSynthEffect is an open-source printed circuit board by cracked-machine, from the cracked-machine/GuitarPLLSynthEffect repository on GitHub. It is a 2-layer board of 83.3 × 164.5 mm with 70 parts on 97 nets, routed with 589 tracks and 49 vias.
It is built around the TL072, TC7662BCOA and B10K. It belongs with the audio and music boards of this library.
Main components
3
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
TC7662BCOA
SOIC-80℃~+70℃ 1.5V~15V 10kHz 160uA 65Ω 96% Inverted SOIC-8 Charge Pumps ROHSMicrochip TechnologyCharge PumpsB10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorised
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C_OABY1, C_OABY2, C_OABY3, C_OABY4, C_OABY5, C_OABY6, C_OABY13, C_PWRBY2, C_PWRBY3 |
| 6 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J_AUX2MAIN_FXSW1, J_AUX2MAIN_PLL1, J_AUX2MAIN_VOL1, J_MAIN2AUX_FXSW1, J_MAIN2AUX_PLL1, J_MAIN2AUX_VOL1 |
| 5 | 10uF | Capacitors_SMD:CP_Elec_4x5.3 | C_PWRBY1, C1_NEG1, C1_NEG2, C2_NEG1, C2_NEG2 |
| 4 | 2K7 | Resistors_SMD:R_0805_HandSoldering | R_LED1, R_OA_IN1, R_OA_OUT1, R_SAW1 |
| 4 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J_AUX2MAIN_FX1, J_AUX2MAIN_INSW1, J_MAIN2AUX_FX1, J_MAIN2AUX_INSW1 |
| 3 | JACK__MONO_2P_NC | custom_sockets:JackSocket_Mono_PCB | J_CLEAN_IN1, J_DIRTY_IN1, J_OU1 |
| 3 | SW_SPDT | custom_sw:SW_SPDT_W6.86MM_L12.7MM_P4.8MM_D2MM | SW_HOLD1, SW_INSW1, SW_WAVE1 |
| 2 | 10K | Resistors_SMD:R_0805_HandSoldering | R_MIX_F1, R_MIX_G1 |
| 2 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C_CLEAN_IN1, C_DIRTY_IN1 |
| 2 | B100K | Potentiometers:Potentiometer_Bourns_PTV09A-1_Horizontal | DAMPEN1, MIX1 |
| 2 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J_AUX2MAIN_LED1, J_MAIN2AUX_LED1 |
| 2 | TL072 | SMD_Packages:SOIC-8-N | U_OAFXBUF1, U_OAPLLSAW1 |
| 2 | _TC7662B | SMD_Packages:SOIC-8-N | U_NEG1, U_NEG2 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R_SFOUT1 |
| 1 | 10R | Resistors_SMD:R_0805_HandSoldering | R_SAWJOIN1 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C_SAWINT1 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C_HOLD2 |
| 1 | 15R | Resistors_SMD:R_0805_HandSoldering | R_OA_OUT_F1 |
| 1 | 1K | Resistors_SMD:R_0805_HandSoldering | R_SAWFB1 |
| 1 | 2.2uF | Capacitors_SMD:C_0805_HandSoldering | C_HOLD1 |
| 1 | 22K | Resistors_SMD:R_0805_HandSoldering | R_SWING1 |
| 1 | 22nF | Capacitors_SMD:C_0805_HandSoldering | C_VCO1 |
| 1 | 470nF | Capacitors_SMD:C_0805_HandSoldering | C_LPF1 |
| 1 | 47nF | Capacitors_SMD:C_0805_HandSoldering | C_PllRefIn1 |
| 1 | 560R | Resistors_SMD:R_0805_HandSoldering | R_FXVOL1 |
| 1 | B10K | Potentiometers:Potentiometer_Bourns_PTV09A-1_Horizontal | TRIG1 |
| 1 | B1K | Potentiometers:Potentiometer_Bourns_PTV09A-1_Horizontal | FXVOL1 |
| 1 | B1M | Potentiometers:Potentiometer_Bourns_PTV09A-1_Horizontal | SWING1 |
| 1 | B50K | Potentiometers:Potentiometer_Bourns_PTV09A-1_Horizontal | FMOD1 |
| 1 | Jumper_NC_Dual | Oddities:NetTie-II_Connected_SMD | JP_MIXEDGND1 |
| 1 | LED | LEDs:LED_D5.0mm | D_ON1 |
| 1 | SW_3PDT_on_on | custom_sw:SW_3PDT_W18MM_L17.3MM_P5.3MM_D2MM_PCBPin | SW_BYPASS1 |
| 1 | TEST_1P | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | JTP1 |
| 1 | TL074 | SMD_Packages:SOIC-14_N | U_MAINOA1 |
| 1 | _4046 | Custom_SMD_Packages:SO-16-N++ | U_PLL1 |
| 1 | _Barrel_Jack | custom_sockets:BARREL_JACK | J_POWER1 |
| 1 | _Schottky | Diodes_SMD:D_SOD-123F | D_IN1 |
Similar boards
- 2 layers48.4 × 106.3 mm
- 2 layers60 × 110 mm
- 2 layers38 × 100 mm
- 2 layers40 × 99 mm
- 2 layers90.2 × 128.5 mm
Vintage Dual VCA v1.0
StudioKAT/VintageDualVCA
If nothing is patched into OUT1, the signal from CH1 is automatically mixed into OUT2.
113 parts7 - 2 layers29.2 × 106.7 mm
- 2 layers30 × 100 mm
Questions
How big is the GuitarPLLSynthEffect PCB?
It measures 83.3 × 164.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GuitarPLLSynthEffect use?
70 parts, built around the TL072, TC7662BCOA and B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GuitarPLLSynthEffect KiCad files?
From the cracked-machine/GuitarPLLSynthEffect repository on GitHub, at the commit this page was made from: the board is GuitarPLLSynthEffect.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GuitarPLLSynthEffect design in my own project?
Its repository states no licence, so its author keeps all rights: ask cracked-machine before reusing the design.