2 layers31 × 31 mm
Crosspoint switches
RepRapLtd/AnalogueNeuralNet
Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments
20 parts8GPL-3.0
4 layers249.6 × 122.6 mm
BassStation Sequencer MidiInterface
cracked-machine/BassStationSequencerMidiController1Sequencer/MIDI Controller for Novation BassStation1
- Size
- 249.6 × 122.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 199
- Nets
- 216
- Pads
- 928
- Tracks, vias
- 1,602, 462
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Jun 2021
- Updated
- 24 Jun 2022
Overview
BassStation Sequencer MidiInterface is an open-source printed circuit board by cracked-machine, from the cracked-machine/BassStationSequencerMidiController repository on GitHub. It is a 4-layer board of 249.6 × 122.6 mm with 199 parts on 216 nets, routed with 1,602 tracks and 462 vias.
It is built around the 74LVC1G34Z, 6N135S and ADG2188BCP, with the SE8233X2-HF and SI2323DS among its other parts. Its parts include 43 ICs, 26 resistors, 25 capacitors, 8 switches and 7 diodes. It belongs with the STM32 boards of this library.
Main components
5
74LVC1G34Z
SOT-553-5-40℃~+125℃ 1 1 1.65V~5.5V 1.6ns@5V,50pF 10uA 32mA 32mA 74LVC Power-off isolation Push-pull Unidirectional SOT-553-5 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
6N135S
SOP-8-2.54mm-55℃~+100℃ 1 1.45V 1Mbit/s 1kV/us 200mW 25mA 2us 2us 50mA 5V 5kV DC SOP-8-2.54mm Logic Output Optoisolators ROHSSlkorLogic Output Optoisolators
ADG2188BCP
QFN32I2C CMOS 8×8 Unbuffered Analog Switch Array with Dual/Single SuppliesAnalog DevicesUncategorised
SE8233X2-HF
SOT-23-20℃~+85℃@(Ta) 1 150mA 24V 3.3V 3uA 500mV@(100mA) Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSeaward ElecVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SI2323DS
SOT-23-3-55℃~+150℃ 1 P-Channel 1.7W 190pF 20V 290pF 39mΩ@4.5V、58mΩ@2.5V 4.1A 450mV 7.8nC@4.5V 740pF SOT-23-3 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdBassStationMidiController
Discussion and Design
Parts
199| Qty | Value | Footprint | References |
|---|---|---|---|
| 51 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +35 |
| 32 | PCB-SPST_RGB-LED-Counter-Clockwise | PCB_SW_LED:Circular_3mm_10mm_Cree_PLLC6_CLY6D-FKC-CK1N1D1BB7D3D3 | U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +16 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8, C9, C10, C11, C12, C17, C20, C21 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R21, R22, R23, R24, R26, R28, R29 |
| 6 | SW_SPST | Button_Switch_THT:SW_PUSH-12mm | SW4, SW5, SW6, SW8, SW9, SW10 |
| 5 | 2K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R13, R27, R32 |
| 5 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R10, R14, R18, R19 |
| 5 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5, D6, D7 |
| 4 | 10uF 20V X5R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C1, C2, C15, C16 |
| 4 | 22uF 10V X5R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C4, C5, C18, C19 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C13, C14 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C24, C25 |
| 3 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 3 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 220R | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R11, R12 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C23 |
| 2 | 4.7uH | Inductor_SMD:L_Taiyo-Yuden_NR-80xx_HandSoldering | L1, L2 |
| 2 | 56K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R25 |
| 2 | TLC5955DCA_HTSSOP56 | Package_SO:HTSSOP-56-1EP_6.1x14mm_P0.5mm_EP3.61x6.35mm | U36, U37 |
| 2 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U38, U39 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123F | D2 |
| 1 | 6N135S | Package_DIP:SMDIP-8_W9.53mm | U43 |
| 1 | 74LVC1G34 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U42 |
| 1 | ADG2188 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias | U34 |
| 1 | ADP5587-ACPZ_LFCSP24 | Package_CSP:LFCSP-24-1EP_4x4mm_P0.5mm_EP2.3x2.3mm | U35 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J5 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07 | 2.42Inch_OLED_SSD1309:2.42Inch_OLED_SSD1309 | J8 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J7 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J4 |
| 1 | MCP1703A-3302_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U41 |
| 1 | MIDI_IN | RS_5P180_DIN5_SOCKET_WSHIELD:RS_5P180_DIN5_SOCKET_WSHIELD | J1 |
| 1 | MIDI_OUT | RS_5P180_DIN5_SOCKET_WSHIELD:RS_5P180_DIN5_SOCKET_WSHIELD | J2 |
| 1 | MMSZ4694T1G | Diode_SMD:D_SOD-123F | D1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1 |
| 1 | SE8233X2 | Package_TO_SOT_SMD:SOT-23 | U40 |
| 1 | STM32G0B1_KxTxN_LQFP32 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U33 |
| 1 | SW_SPST | DailywellSwitches:Dailywell_SPDT | SW3 |
| 1 | Si2323DS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
The 174 most common of 199 parts.
Similar boards
- 4 layers73.7 × 80 mm
STM32MP1 TestBoard RevB
cracked-machine/STM32MP1_TestBoard_RevB
RevB breakout board for STM32MP1 (Dual A7 + M4). All pins routed to 0.1" headers.
116 parts9MIT - 4 layers73.7 × 80 mm
- 2 layers16.6 × 17.8 mm
STM32G031J6 Breakout
cracked-machine/STM32G031J6_Breakout
Breakout board for the 8 pin STM32 MCU. Onboard reset button and 30V input LDO.
11 parts1 - 4 layers22.9 × 50.8 mm
Penguino STM32WL M
azerimaker/Penguino-STM32WL-MAMWLExx
This repo contains all the necessary design and fabrication files for the MoveSolution's MAMWLExx based Penguino STM32WL breakout board.
68 parts15 - 4 layers22.9 × 50.8 mm
Penguino Feather-4260-v1
azerimaker/Penguino-RAK4260
This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.
60 parts8 - 2 layers69.7 × 40 mm
5v to bipolar15v PSU
tommassey/5v_to_bipolar15v_PSU
Small SMPS to provide ~200mA of +15v/-15v from a single 5v-12v DC supply
59 parts2 - 2 layers75 × 40.5 mm
Questions
How big is the BassStation Sequencer MidiInterface PCB?
It measures 249.6 × 122.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BassStation Sequencer MidiInterface use?
199 parts, built around the 74LVC1G34Z, 6N135S, ADG2188BCP and SE8233X2-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BassStation Sequencer MidiInterface KiCad files?
From the cracked-machine/BassStationSequencerMidiController repository on GitHub, at the commit this page was made from: the board is SequencerMidiController/BassStation_Sequencer_MidiInterface.kicad_pcb and its schematic SequencerMidiController/10PinARMSWD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BassStation Sequencer MidiInterface design in my own project?
Its repository states no licence, so its author keeps all rights: ask cracked-machine before reusing the design.