Skip to the content
2 layers91.5 × 87 mmGOATPad, the printed circuit board in 3D

My HackClub macropad project

Size
91.5 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
26
Pads
116
Tracks, vias
118, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Feb 2026
Updated
17 Feb 2026

Overview

GOATPad is an open-source printed circuit board by cr1spyapple, from the cr1spyapple/GOATPad repository on GitHub. It is a 2-layer board of 91.5 × 87 mm with 26 parts on 26 nets, routed with 118 tracks and 0 vias.

Its parts include 12 diodes, 12 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

GOATPad

My first attempt at a macropad for Hack Club. Designed to use with for hotkeys on CAD (fusion 360) and digital art (krita).

This entire project took 15+ hours, most of which was spent navigating and battling fusion 360. Designing the PCB was the most straightforward process, despite 3 iterations of it being created during the process I pulled through. All in all this was a fun project, and I learnt a lot about the CAD and PCB design workflow.

(PS. The actual thing has key caps...)

Featuring:

  • Xiao RP2040 Microcontroller
  • 12 keys (3x4 Matrix PCB)
  • SSD1306 0.91" OLED display
  • An imaculate 3D printed case designed by yours truly
  • Silkscreen easter egg (iykyk)

Schematic

PCB Traces

Case

The full case .STEP file had to be compressed to a ZIP file for me to upload to GitHub...

Firmware

I made it using QMK (all files included), however it has yet to be tested...

BOM

  • 1x Xiao RP2040
  • 1x Case (2x 3D Printed parts)
  • 1x 0.91" 128x32 SSD1306 OLED Display
  • 12x Cherry MX Switches
  • 12x DSA Caps
  • 12x 1N4148 DO-35 Diodes
  • 4x M3x16mm Screws
  • 4x M3x5mx4mm Heat Inserts

Parts

26
QtyValueFootprintReferences
121N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
12SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12
1Conn_01x04_Pinssd1306 0.91:SSD1306-0.91-OLED-4pin-128x32OLED_DISPLAY1
1XIAO-RP2040-DIPOPL Library:XIAO-RP2040-DIPU1

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the GOATPad PCB?

It measures 91.5 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GOATPad use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GOATPad KiCad files?

From the cr1spyapple/GOATPad repository on GitHub, at the commit this page was made from: the board is PCB/GOATPad.kicad_pcb and its schematic PCB/GOATPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the GOATPad design in my own project?

Its repository states no licence, so its author keeps all rights: ask cr1spyapple before reusing the design.