

SPIKE
A sleek ESP-32 microcontroller featuring additional PSRAM, plus WiFi and Bluetooth connectivity.
- Size
- 29.3 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 70
- Pads
- 242
- Tracks, vias
- 620, 77
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 May 2026
- Updated
- 9 Jun 2026
Overview
SPIKE is an open-source printed circuit board by cr1spyapple, from the cr1spyapple/SPIKE repository on GitHub. It is a 2-layer board of 29.3 × 56.5 mm with 56 parts on 70 nets, routed with 620 tracks and 77 vias.
It is built around the ESP32-S3, TLV62569DRL and W25Q128JVSIQ. Its parts include 21 capacitors, 17 resistors, 4 ICs, 4 inductors and 3 connectors. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
3ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsTLV62569DRL
SOT-563-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 35uA 600mV~5.5V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Operating status indication Step-down type Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdSPIKE
A sleek and speedy ESP32-S3 powered development board
Designed in KiCAD as part of STASIS for Hack Club. I took up this project to learn more about PCB and MCU design. This acts as a prototype of sorts to my e-Reader project "Bebop" which will use similar hardware to this.
Specs:
- 32 GPIO pins
- 16MB flash
- 8MB PSRAM
- WiFi and Bluetooth connectivity
- USB-C port
PCB Model
Schematic
PCB Traces
Bill of Materials
| Name | Purpose | Quantity | Total Cost (USD) | Link | Distributor |
|---|---|---|---|---|---|
| 10kΩ ±5% 100mW 0603 Thick Film Resistor | 100 | 0.11 | https://www.lcsc.com/product-detail/C2930027.html | ||
| 1.2pF 50V Ceramic Capacitor C0G 0402 | 50 | 1.79 | https://www.lcsc.com/product-detail/C76899.html | ||
| 100nF ±10% 16V Ceramic Capacitor X7R 0402 | 100 | 0.16 | https://www.lcsc.com/product-detail/C60474.html | ||
| 1uF ±10% 16V Ceramic Capacitor X5R 0402 | 100 | 0.38 | https://www.lcsc.com/product-detail/C29266.html | ||
| 20pF ±5% 50V Ceramic Capacitor C0G 0402 | 100 | 0.57 | https://www.lcsc.com/product-detail/C76959.html | ||
| 2.7V~3.6V 128Mbit 133MHz SPI SOIC-8-208mil Memory (ICs) RoHS | 3 | 7.92 | https://www.lcsc.com/product-detail/C97521.html | ||
| 2A 1uH ±20% 95mΩ 3.1A 0805 Fixed Inductors RoHS | 5 | 1.05 | https://www.lcsc.com/product-detail/C1331798.html | ||
| 140mA 24nH ±3% 2.3Ω Thick Film Inductor 0201 Fixed Inductors RoHS | 100 | 0.84 | https://www.lcsc.com/product-detail/C206441.html | ||
| 500mA 2nH 100mΩ 0603 Fixed Inductors RoHS | 50 | 0.65 | https://www.lcsc.com/product-detail/C395081.html | ||
| USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount | 5 | 0.94 | https://www.lcsc.com/product-detail/C165948.html | ||
| Red 645nm LED Indication - Discrete 2.4V 0603 | 100 | 0.70 | https://www.lcsc.com/product-detail/C2286.html | ||
| 22uF ±20% 10V Ceramic Capacitor X5R 0603 | 10 | 0.21 | https://www.lcsc.com/product-detail/C86295.html | ||
| 10nF ±10% 50V Ceramic Capacitor X7R 0603 | 100 | 0.37 | https://www.lcsc.com/product-detail/C100042.html | ||
| 499Ω ±1% 62.5mW 0402 Thick Film Resistor | 100 | 0.07 | https://www.lcsc.com/product-detail/C4125.html | ||
| 800mA 2.4nH 80mΩ Multilayer inductor 0402 Fixed Inductors RoHS | 10 | 0.10 | https://www.lcsc.com/product-detail/C275281.html | ||
| 10uF ±20% 25V Ceramic Capacitor X5R 0603 | 20 | 0.61 | https://www.lcsc.com/product-detail/C96446.html | ||
| Crystal 40MHz ±10ppm 15pF SMD3225-4P | 10 | 0.69 | https://www.lcsc.com/product-detail/C5444549.html | ||
| SOP-8L Memory (ICs) RoHS | 2 | 8.93 | https://www.lcsc.com/product-detail/C3028887.html | ||
| 1.5MHz Step-down type Adjustable 600mV~5.5V 2A SOT-563 Voltage Regulators - DC DC Switching Regulators RoHS | 5 | 0.59 | https://www.lcsc.com/product-detail/C163217.html | ||
| -98.4dBm 150Mbps 2.412GHz | 3 | 9.06 | https://www.lcsc.com/product-detail/C2913192.html | ||
| Tactile Switch SPST 160gf 2mm SMD (SMT) Tab 4mm x 3mm Surface Mount | 10 | 0.57 | https://www.lcsc.com/product-detail/C720477.html | ||
| 100mW 100kΩ 75V Thick Film Resistor ±100ppm/℃ ±1% 0603 Chip Resistor - Surface Mount RoHS | 100 | 0.15 | https://www.lcsc.com/product-detail/C14675.html | ||
| 453kΩ ±0.1% 100mW 0603 Thin Film Resistor | 20 | 0.48 | https://www.lcsc.com/product-detail/C2686428.html | ||
| 75Ω ±1% 100mW 0603 Thick Film Resistor | 100 | 0.19 | https://www.lcsc.com/product-detail/C4275.html | ||
| 22Ω ±5% 100mW 0603 Thick Film Resistor | 100 | 0.12 | https://www.lcsc.com/product-detail/C2907129.html | ||
| 5.1kΩ ±1% 100mW 0603 Thick Film Resistor | 100 | 0.13 | https://www.lcsc.com/product-detail/C2907044.html | ||
| 0Ω 125mW 200V Thick Film Resistor 0805 Chip Resistor - Surface Mount RoHS | 100 | 0.63 | https://www.lcsc.com/product-detail/C844934.html | ||
| 4.7uF ±10% 16V Ceramic Capacitor X5R 0603 | 10 | 0.14 | https://www.lcsc.com/product-detail/C19666.html | ||
| Header pins | Header pins for PCB | 1 | 1.98 | https://www.aliexpress.com/item/1005008703085861.html?search_p4p_id=202605091107184238603551627500001818552_9 | Aliexpress |
| Soldering paste (20g) | Soldering components | 1 | 3.46 | https://www.aliexpress.com/item/1005009377104599.html?mp=1 | Aliexpress |
| Hot Plate | Soldering SMD components | 1 | 13.99 | https://www.aliexpress.com/item/1005007016135854.html?mp=1 | Aliexpress |
| 65W Type-C power adapter | Power supply for Hot Plate | 1 | 12.68 | https://www.ebay.co.uk/itm/406309629830 | Ebay |
| PCB | PCB | 5 | 4.10 | JLCPCB |
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R12 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C10 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C8, C22, C23, C34 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R13, R14, R19 |
| 2 | 1.2pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C19 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | Conn_01x17 | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J1, J2 |
| 2 | NC | Resistor_SMD:R_0805_2012Metric | C17, C18 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L4 |
| 1 | 2.0nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 2.4nH | Inductor_SMD:L_0805_2012Metric | L5 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C39 |
| 1 | 24nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 499 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 75 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | APS6404L-3SQRx-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Antenna_Dipole | MyLibrary:Trace Antenna 2.4GHz | AE1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | ART:ED_smile | Front |
| 1 | LOGO | ART:Spike_manga | Back |
| 1 | RST | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | TLV62569DRL | Package_TO_SOT_SMD:SOT-563 | U5 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U7 |
Similar boards
- 4 layers109.8 × 145 mm

- 6 layers47.5 × 50 mm

- 4 layers65.6 × 34 mm

Anice
hackclub/reflow
A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.
95 parts2 - 4 layers90 × 20 mm

- 8 layers80 × 49 mm

- 6 layers190 × 140 mm

- 6 layers98 × 27.5 mm

Ovio core
korken89/ovio_core
Work in progress. PCB have arrived for v1.0 of the board and bring-up has started.
196 parts30 - 4 layers50 × 31 mm

Sapphire captain
gregdavill/daikin-esp
ESP32-C3 hardware to connect to a Daikin ducted A/C system. enabling WiFi control in Home Assistant.
77 parts29
Questions
How big is the SPIKE PCB?
It measures 29.3 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SPIKE use?
56 parts, built around the ESP32-S3, TLV62569DRL and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SPIKE KiCad files?
From the cr1spyapple/SPIKE repository on GitHub, at the commit this page was made from: the board is SPIKE.kicad_pcb and its schematic SPIKE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SPIKE design in my own project?
Its repository states no licence, so its author keeps all rights: ask cr1spyapple before reusing the design.