Skip to the content
2 layers10.5 × 12 mmESP32 USB spy, the printed circuit board in 3D

Smallest ESP32-based board ever possible

Size
10.5 × 12 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
35
Pads
131
Tracks, vias
221, 22
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
1 Apr 2026
Updated
1 Apr 2026

Overview

ESP32 USB spy is an open-source printed circuit board by cpla33, from the cpla33/ESP32_USB-spy repository on GitHub. It is a 2-layer board of 10.5 × 12 mm with 21 parts on 35 nets, routed with 221 tracks and 22 vias.

It is built around the ESP32-C3FH4 and TPS74801DRCR. Its parts include 11 capacitors, 4 resistors, 2 ICs, 1 connector and 1 inductor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

readme.md

The Smallest ESP32-based board

I was excited to see a few really cool custom boards built around the ESP32 chip and I decided to participate in that covert challenge creating the smallest board ever possible. As the main goal was to minimize the board dimensions as much as possible I agreed to refuse any GPIO population focusing on its main purpose. So what kind of the board could have no pins for external periphery connection? Right, considering its tiny dimensions that could be only the Spy-device.

preview

This repo was created in addition to my article at Hackaday.io

Hardware

Current board was designed around the components listed below:

  1. ESP32-C3FH4 microcontroller;
  2. SMD2016-4P Crystal oscillator;
  3. TLV75733PDRVR voltage regulator;
  4. 2450AT42A100E ceramic chip antenna.

The board itself designed to be plugged inside regular USB header.

preview

Firmware

I am not going to spy on somebody. Thus there is only a wifi-scanner firmware in the FIRMWARE to test the main feature of the board.

Parts

21
QtyValueFootprintReferences
3100nCapacitor_SMD:C_0201_0603MetricC3, C4, C201
31uCapacitor_SMD:C_0201_0603MetricC1, C2, C6
210kResistor_SMD:R_0201_0603MetricR2, R203
210pCapacitor_SMD:C_0201_0603MetricC5, C209
110nCapacitor_SMD:C_0201_0603MetricC204
110uCapacitor_SMD:C_0402_1005MetricC7
110uCapacitor_SMD:C_0603_1608MetricC207
11k15Resistor_SMD:R_0201_0603MetricR3
12nH (0402) 900mACapacitor_SMD:C_0402_1005MetricL201
13k57Resistor_SMD:R_0201_0603MetricR1
140MHz (2016)Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY201
1Antenna_Chipfootprints:C2917719_ANT-SMD_L5.0-W2.0AE201
1ESP32-C3FH4Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mmU201
1TPS74801DRCRPackage_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mmU1
1USB_Afootprints:USB-A_pcbJ102

Similar boards

  • 4 layers36.6 × 100 mmEchometer, the printed circuit board in 3D

    Echometer

    wzwqoo/Echometer

    KiCad 10 project (v4.kicadpro, schematic + 4-layer PCB), fabrication outputs in fab/, BOM in v4.csv, and the parametric acoustic-horn generator ultrasonichornfreecad.py.

    78 parts
  • 4 layers58 × 56.1 mmRadar board, the printed circuit board in 3D

    Radar board

    wzwqoo/single_camera_single_radar_rx_launch_monitor

    A low-cost launch monitor that recovers a ball's launch vector from one high-speed monochrome camera and one 24 GHz CW Doppler radar — the RF front-end, the acquisition firmware, the synchronized recorder, and the…

    82 parts
  • 4 layers86 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    22 parts2
  • 6 layers64.2 × 17.3 mmOpenRX panel rev2.2, the printed circuit board in 3D

    OpenRX panel rev2.2

    OpenDrone-hw/OpenRX

    OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

    254 parts489CERN-OHL-S-2.0
  • 4 layers46.5 × 40 mmSpark Analyzer, the printed circuit board in 3D

    Spark Analyzer

    tooyipjee/Spark-Analyzer

    USB-PD ESP32 Power Analyzer

    84 parts171MIT
  • 6 layers17 × 15.7 mmOpenRX Gemini, the printed circuit board in 3D

    OpenRX Gemini

    OpenDrone-hw/OpenRX-Gemini

    Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

    86 parts11CERN-OHL-S-2.0
  • 4 layers95.9 × 46 mmDragon 4L R02, the printed circuit board in 3D

    Dragon 4L R02

    CyberSaiyanIT/why2025-badge

    Cyber Saiyan community has designed and developed a special gadget for WHY2025. The badge was designed to recall the dragon spheres, and is an updated version of RomHack Camp 2022 badge, both in term of design and…

    127 parts10MIT
  • 2 layers93 × 173 mmBatch 1, the printed circuit board in 3D

    Batch 1

    CDFER/Business-Cards

    Showcasing a collection of functional PCB business cards, each demonstrating a unique embedded electronics project.

    479 parts9

Questions

How big is the ESP32 USB spy PCB?

It measures 10.5 × 12 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 USB spy use?

21 parts, built around the ESP32-C3FH4 and TPS74801DRCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 USB spy KiCad files?

From the cpla33/ESP32_USB-spy repository on GitHub, at the commit this page was made from: the board is HARDWARE/DESIGN/esp32_usb_spy.kicad_pcb and its schematic HARDWARE/DESIGN/esp32_usb_spy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 USB spy design in my own project?

Its repository states no licence, so its author keeps all rights: ask cpla33 before reusing the design.