4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0
2 layers41.4 × 55.1 mm
Atari2600-MultiGame
costarc/Atari2600-MultiGame1A Atari cartridge PCB with dip switch for 16 4K games.
- Size
- 41.4 × 55.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 28
- Pads
- 73
- Tracks, vias
- 184, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Jun 2024
- Updated
- 1 Jul 2024
Overview
Atari2600-MultiGame is an open-source printed circuit board by costarc, from the costarc/Atari2600-MultiGame repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.4 × 55.1 mm with 9 parts on 28 nets, routed with 184 tracks and 8 vias.
It is built around the 74LVC1G04Z. Its parts include 4 resistors, 2 ICs, 1 connector and 1 switch. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdAtari 2600 MultiGame Cartridge
Bill of material
Bill of Material is in interactive mode - click on file https://github.com/costarc/Atari2600-MultiGame/blob/master/ibom.html (you may need to download to your local computer to see it properly)
Description
This cartridge supports 2K and 4K games.
2K games must be 4K as well (two copies of the same file appended). For example, the followign two commands will (compatible with Mac OS, Linux and CygWin in windows) will create a 4kgame.bin file with two copies of the same 2kgame.bin:
cat 2kgame.bin > 4kgame.bin
cat 2kgame.bin >> 4kgame.bin
The PCB supports 27C512 ROMs and EPROMS and can hold up to 16 games, switchable via the DIP Switch at the back of the cartridge.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | 2600_Cartridge_Port | Roni_Footprints:2600_Cartridge_Port | J1 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm | U2 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_DIP_x04 | Roni_Footprints:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
Questions
How big is the Atari2600-MultiGame PCB?
It measures 41.4 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atari2600-MultiGame use?
9 parts, built around the 74LVC1G04Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atari2600-MultiGame KiCad files?
From the costarc/Atari2600-MultiGame repository on GitHub, at the commit this page was made from: the board is Atari2600MultiGame.kicad_pcb and its schematic Atari2600MultiGame.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atari2600-MultiGame design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers83.1 × 92.5 mm
- 2 layers101.6 × 137.4 mm
- 2 layers97 × 79.5 mm
MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
104 parts35Unlicense - 4 layers88.9 × 20.3 mm
- 2 layers25.4 × 78.2 mm
Sd board
w0ts/optimist
Optimist: an open, modular firmware platform for the M-VAVE FM-1 (from SLOOP / Felucca)
28 parts32GPL-3.0 - 4 layers30 × 53.5 mm
Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
54 parts20 - 4 layers178 × 99 mm
FreeDSP OCTAVIA
freeDSP/freeDSP-OCTAVIA
8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input
529 parts19CC-BY-SA-4.0