

Mystery box v3
PCB to visiual analogue telephone ringing
- Size
- 136 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 51
- Pads
- 201
- Tracks, vias
- 388, 41
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Sep 2022
- Updated
- 12 Aug 2026
Overview
Mystery box v3 is an open-source printed circuit board by cosmiccableltd, from the cosmiccableltd/mystery-box repository on GitHub. It is a 2-layer board of 136 × 100 mm with 61 parts on 51 nets, routed with 388 tracks and 41 vias.
It is built around the THVD1400D, IRLZ44N and WS2812B. Its parts include 8 resistors, 5 diodes, 3 transistors, 3 connectors and 2 capacitors.
Main components
3THVD1400D
SOIC-8-40℃~+125℃ 1 1 1.5mA 256 3V~5.5V 500Kbps Enable shutdown、Tx/Rx enable Half-Duplex Transceiver ±12kV SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdMystery Box
About
The Mystery Box is a small PCB which provides power ports for various devices to indicate a ringing phone and drive POE devices. It was designed by Cosmic Cable Ltd. to be used for self-made telephone booths.

Ports
| Port Name | Function | Usage |
|---|---|---|
| J1 | POE Port | POE powered network device |
| J2 | LAN Port | Connection to external network |
| J3 | Analogue Telephone Port | Connection to external analogue network |
| J4 | Analogue Telephone Port | Connection to analogue telephone |
| X1-1 | +12V | |
| X1-2 | GND (switched) | swichted on ringing phone line |
| X1-3 | +12V | |
| X1-4 | GND | |
| X1-5 | +12V | |
| X1-6 | GND | |
| X1-7 | +12V | |
| X1-8 | GND |
Known Issues
We experienced that the PMV20EN Q2 Mosfet might die from to high current. It should be changed to something which can handle more current or otherwise it must be ensured that the outgoing power is limited.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | GPIO_T1, GPIO_T2, GPIO_T3, J1, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, SW01, SW02 +1 |
| 6 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | GPIO_CONN1, JMP_BUCK_PWR1, JMP_NEO1_PWR1, JMP_NEO2_PWR1, JMP_NEO3_PWR1, JMP_POE1 |
| 4 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | DMX_T1, NEO_T1, NEO_T2, NEO_T3 |
| 3 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8 |
| 3 | D | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | NEOPIXEL1, NEOPIXEL2, NEOPIXEL3 |
| 2 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R9 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JMP_5V_USB-BUCK1, PWR_12V_FAN1 |
| 2 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_Clear | LED_12V_SW1, LED_12V1 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | Barrel_Jack_MountingPin | eigene_footprints:CUI_PJ-050BH | J18 |
| 1 | D_Zener | Diode_THT:D_A-405_P7.62mm_Horizontal | D5 |
| 1 | M1 | eigene_footprints:24V Boost Converter | 24V-Boost-Converter1 |
| 1 | M2 | eigene_footprints:5V Buck Converter | 5V-Buck-Converter1 |
| 1 | SERIAL1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | THVD1400D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | U3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | SmartSwitch1 |
| 1 | XLR3 | Connector_Audio:Jack_XLR_Neutrik_NC3FAAH-0_Horizontal | DMX_XLR1 |
| 1 | rj45-CC-X2-Aliexpress | eigene_footprints:RJ45_X2_CC_Aliexpress | J20 |
| 1 | ~ | eigene_footprints:ESP32-S3-Zero | ESP32_S3 |
More from cosmiccableltd/mystery-box
1- 2 layers136 × 100 mm

Similar boards
- 2 layers40 × 70 mm

KinetiCoreDC
axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.
183 parts1CERN-OHL-S-2.0 - 2 layers160 × 100 mm

Base
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.
83 parts1 - 4 layers80 × 80 mm

- 4 layers160 × 106 mm

- 2 layers58 × 32.9 mm

- 2 layers140 × 218 mm

Helio-485
GrizJW/helio-485
Helio-485 KiCad board: ESP32-C5, 2S 18650, solar input, 3.3 V, 12 V 2 A, RS-485 Modbus.
106 parts - 4 layers51.5 × 89 mm

IbScaleFeederLite
ibScale/ibScaleFeederLite
ibScale Lite Feeder for the LumenPNP
89 partsCERN-OHL-S-2.0 - 2 layers83.7 × 42.6 mm

SmartPot
LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.
51 parts
Questions
How big is the Mystery box v3 PCB?
It measures 136 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mystery box v3 use?
61 parts, built around the THVD1400D, IRLZ44N and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mystery box v3 KiCad files?
From the cosmiccableltd/mystery-box repository on GitHub, at the commit this page was made from: the board is ver3/mystery_box-v3.kicad_pcb and its schematic ver3-prototype/mystery_box-v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mystery box v3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cosmiccableltd before reusing the design.