

Rs485 breakout
Dual RS485 breakout
- Size
- 58 × 32.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 15
- Pads
- 73
- Tracks, vias
- 223, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 23 Jun 2024
Overview
Rs485 breakout is an open-source printed circuit board by albachten, from the albachten/rs485_breakout repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 58 × 32.9 mm with 19 parts on 15 nets, routed with 223 tracks and 41 vias.
It is built around the THVD1400D, RS485 and RJ45. Its parts include 6 resistors, 4 connectors, 2 capacitors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
3THVD1400D
SOIC-8-40℃~+125℃ 1 1 1.5mA 256 3V~5.5V 500Kbps Enable shutdown、Tx/Rx enable Half-Duplex Transceiver ±12kV SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsRS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdRS485 Breakout Board
- Includes 2 half-duplex RS485 interfaces
- Allows using CAT6 patch cables w/6 wires carrying power and one pair for communication
- Termination resistors were chosen to match 100ohm impedence of Cat5/6 Ethernet cables

Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 600R | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 110R | Resistor_SMD:R_0805_2012Metric | R2, R5 |
| 2 | RJ45 | MyLib:RJ45_SS-700810-NF | J0, J1 |
| 2 | THVD1400D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | DATA | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J3 |
| 1 | LOGO | MyLib:pirho_0.50 | G*** |
| 1 | RS485 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
Similar boards
- 4 layers160 × 106 mm

- 2 layers136 × 100 mm

- 2 layers40 × 70 mm

KinetiCoreDC
axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.
183 parts1CERN-OHL-S-2.0 - 2 layers160 × 100 mm

Base
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.
83 parts1 - 4 layers80 × 80 mm

- 2 layers140 × 218 mm

Helio-485
GrizJW/helio-485
Helio-485 KiCad board: ESP32-C5, 2S 18650, solar input, 3.3 V, 12 V 2 A, RS-485 Modbus.
106 parts - 4 layers51.5 × 89 mm

IbScaleFeederLite
ibScale/ibScaleFeederLite
ibScale Lite Feeder for the LumenPNP
89 partsCERN-OHL-S-2.0 - 2 layers83.7 × 42.6 mm

SmartPot
LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.
51 parts
Questions
How big is the Rs485 breakout PCB?
It measures 58 × 32.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rs485 breakout use?
19 parts, built around the THVD1400D, RS485 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rs485 breakout KiCad files?
From the albachten/rs485_breakout repository on GitHub, at the commit this page was made from: the board is RS485_breakout.kicad_pcb and its schematic RS485_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rs485 breakout design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).