2 layers18.5 × 7.1 mm
2 layers18.5 × 5.5 mm
InlineResistor
corygrant/ResistorHelpers4- Size
- 18.5 × 5.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 2
- Pads
- 4
- Tracks, vias
- 4, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 May 2023
- Updated
- 6 Sep 2024
Overview
InlineResistor is an open-source printed circuit board by corygrant, from the corygrant/ResistorHelpers repository on GitHub, published under the MIT licence. It is a 2-layer board of 18.5 × 5.5 mm with 3 parts on 2 nets, routed with 4 tracks and 0 vias.
Its parts include 2 connectors and 1 resistor.
README
README.mdResistorHelpers
Small resistor PCBs for wiring, with notches for cable ties.
-
Resistor Divider
-
Resistor Pullup
-
Terminating Resistor
-
Inline Resistor
Images
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J1, J2 |
| 1 | R_US | Resistor_SMD:R_0805_2012Metric | R1 |
Questions
How big is the InlineResistor PCB?
It measures 18.5 × 5.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InlineResistor use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InlineResistor KiCad files?
From the corygrant/ResistorHelpers repository on GitHub, at the commit this page was made from: the board is InlineResistor/InlineResistor.kicad_pcb and its schematic InlineResistor/InlineResistor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InlineResistor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from corygrant/ResistorHelpers
2- 2 layers18.5 × 7.1 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT