4 layers46 × 46 mm
BLDC DriverV1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
75 parts915
4 layers79 × 81 mm
- Size
- 79 × 81 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 103
- Pads
- 345
- Tracks, vias
- 879, 117
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jan 2026
- Updated
- 24 Jan 2026
Overview
Controller is an open-source printed circuit board by cornway, from the cornway/TelegaProject-controller-hardware repository on GitHub. It is a 4-layer board of 79 × 81 mm with 75 parts on 103 nets, routed with 879 tracks and 117 vias.
Its parts include 26 capacitors, 15 resistors, 13 connectors, 8 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C21, C24, C25, C26, C27, C28, C29, C31, C33, C34 |
| 7 | 5.1K | Resistor_SMD:R_0402_1005Metric | R13, R14, R17, R18, R19, R20, R21 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R11, R12, R15, R16, R23, R24 |
| 4 | 100nf | Capacitor_SMD:C_0402_1005Metric | C7, C8, C11, C12 |
| 4 | 10Uf | Capacitor_SMD:C_0805_2012Metric | C22, C23, C30, C32 |
| 4 | Conn_01x01_Pin | Connector_Pin:Pin_D1.0mm_L10.0mm | J8, J9, J11, J12 |
| 4 | LED green | LED_SMD:LED_0603_1608Metric | D2, D4, D6, D7 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J5, J6 |
| 2 | 10pf | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | 12pf | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | ~ | Library:SSOP-24_L8.3-W5.6-P0.65-LS7.6-BL | U1, U3 |
| 1 | 100mOhm | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 32.768kHz | Library:CRYSTAL-SMD_L2.0-W1.2 | U6 |
| 1 | 8MHz | Library:OSC-SMD_4P-L5.0-W3.2-BL | X1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J10 |
| 1 | FRONT_LEFT | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | FRONT_RIGHT | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J4 |
| 1 | LED blue | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LED red | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | REAR_LEFT | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | REAR_RIGHT | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J7 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-223 | U8 |
| 1 | ~ | Library:SW-SMD_4P-L6.0-W6.0-P4.50-LS9.2 | U7 |
| 1 | ~ | Library:MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U2 |
| 1 | ~ | Library:SOD-123_L2.8-W1.8-LS3.7-RD | D1 |
| 1 | ~ | Library:USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 1 | ~ | Library:TSSOP-28_L9.7-W4.4-P0.65-LS6.4-TL | U5 |
Questions
How big is the Controller PCB?
It measures 79 × 81 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Controller use?
75 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the cornway/TelegaProject-controller-hardware repository on GitHub, at the commit this page was made from: the board is controller/controller.kicad_pcb and its schematic controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask cornway before reusing the design.
Similar boards
- 4 layers30 × 30 mm
ReCamera 2002 POE Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
75 parts495Apache-2.0 - 4 layers52.5 × 46.5 mm
- 4 layers100 × 68 mm
Basic ecp5-pcb
mattvenn/basic-ecp5-pcb
Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
75 parts144CC0-1.0 - 4 layers49.5 × 54.9 mm
- 4 layers30 × 30 mm
- 4 layers100 × 49.8 mm
- 4 layers80.7 × 65.8 mm
