4 layers65.7 × 45.8 mm
4 layers77 × 40 mm
Stm32n6 v1.0
cornway/ComputerVisionHw6- Size
- 77 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 170
- Nets
- 230
- Pads
- 694
- Tracks, vias
- 2,286, 341
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2025
- Updated
- 23 Nov 2025
Overview
Stm32n6 v1.0 is an open-source printed circuit board by cornway, from the cornway/ComputerVisionHw repository on GitHub. It is a 4-layer board of 77 × 40 mm with 170 parts on 230 nets, routed with 2,286 tracks and 341 vias.
It is built around the STM32N657X0H3Q, TPS62088YFPR and XC6206P152MR, with the XC6206P282MR and BAT60A among its other parts. Its parts include 93 capacitors, 21 resistors, 14 ICs, 10 inductors and 3 connectors. It belongs with the STM32 boards of this library.
Main components
5
STM32N657X0H3Q
BGA-264(14x14)-40℃~+125℃ 1.71V~3.6V 12bit 165 32 Bit 4.2MB 800MHz ARM Cortex-M55 Built-in+External Power-on reset (POR)、Power-down reset (PDR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Built-in general-purpose timer、Hardware CRC、Calendar function、Built-in temperature sensor、True random number generator (TRNG)、Independent watchdog (IWDG)、Window watchdog (WWDG) BGA-264(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
TPS62088YFPR
DSBGA-6-40℃~+125℃@(TJ) 1 2.4V~5.5V 3A 4MHz 4uA 600mV~4V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Operating status indication、Hiccup current limiting Step-down type Yes DSBGA-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
XC6206P152MR
SOT-23-40℃~+85℃@(Ta) 1 1.5V 1uA 60mA 6V 860mV@(60mA) Fixed Over Current Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
XC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT60A
SOD-323Schottky DiodesSlkor
Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C12, C15, C17, C18, C19, C20, C21, C22, C23, C25, C26, C27, C28, C29, C30 +20 |
| 17 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | SCL1, SDA1, TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP10, TP11, TP12, TP13, TP14, TP15 +1 |
| 14 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3, C7, C9, C10, C54, C55, C56, C57, C58, C59, C60, C61, C63, C64 |
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric | C67, C68, C69, C70, C71, C72, C73, C74, C75 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C11, C24, C48, C49, C50, C53, C90 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C13, C14, C16, C51, C52 |
| 7 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R7, R8, R21 |
| 4 | 1.5uH | Inductor_SMD:L_0805_2012Metric | L7, L8, L9, L10 |
| 4 | 10uf | Capacitor_SMD:C_0805_2012Metric | C78, C79, C84, C87 |
| 4 | 1uf | Capacitor_SMD:C_0603_1608Metric | C82, C83, C86, C89 |
| 3 | ~ | v2.0:UDFN-4_L1.0-W1.0-P0.65-TL | U5, U6, U7 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric | C85, C88 |
| 2 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 2.2uH | v2.0:IND-SMD_L3.0-W3.0 | L5, L6 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C62, C65 |
| 2 | 24k | Resistor_SMD:R_0402_1005Metric | R10, R15 |
| 2 | 4.7uf | Capacitor_SMD:C_0603_1608Metric | C76, C77 |
| 2 | 8.2pF | Capacitor_SMD:C_0402_1005Metric | C91, C93 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | ~ | v2.0:TDFN-8_L3.0-W3.0-P0.65-BL-EP | U2, U3 |
| 2 | ~ | Grinreflex:FFC-SMD_24P-P0.50_FH34SRJ-24S-0.5SH | U9, U13 |
| 1 | - | v2.0:CRYSTAL-SMD_4P-L1.6-W1.2-BL | X1 |
| 1 | 1.0uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C66 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C92 |
| 1 | 160k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 18@100Mhz | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 2.2nH | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 22R | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 240nH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 2R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 30k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 33R | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 56k2 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | BAT60A | Diode_SMD:D_SOD-323 | D2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MX66LM1G45G | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U8 |
| 1 | STM32N657X0H3Q | v2.0:BGA264C80P17X17_1400X1400X100 | IC1 |
| 1 | TPS62088YFP | v2.0:DSBGA-6_L0.8-W1.2-P0.40-R3-C2-TL | U4 |
| 1 | XC6206P152MR | Grinreflex:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U11 |
| 1 | XC6206P282MR | Grinreflex:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U10 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ~ | v2.0:SW-SMD_YZA-021 | SW1 |
| 1 | ~ | Grinreflex:FPC-SMD_8P-P0.50_FH34D-8S-0.5SH-50 | U12 |
| 1 | ~ | v2.0:SW-SMD_SMXS-02K-TP | U1 |
More from cornway/ComputerVisionHw
2- 4 layers35 × 44 mm
Similar boards
- 6 layers40 × 75 mm
- 6 layers55 × 28 mm
Stm32n6-px4
DataFlux-Robot/fluxpcb
全自动AI电路设计流水线: 需求→选型→原理图→PCB→验收仿真→固件,六环节门禁闭环 | Six-stage automated circuit design pipeline with machine-checkable verification gates
21 parts1Apache-2.0 - 6 layers71.5 × 63.6 mm
Sensorboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
426 parts82MIT - 4 layers37.6 × 62 mm
REF2160
RWeick/REF2160-DSi-Action-Replay
Full schematic, PCB Gerbers for the DSi Action Replay, and the rom
23 parts4GPL-3.0 - 2 layers93.2 × 57.7 mm
Primercarrier
Jameswill-Winsock/Tempest
An FPGA based implementation to demonstrate side-channel attacks on modern cryptography algorithms such as AES, RSA, ML-KEM etc.
24 parts1GPL-3.0 - 4 layers66 × 44 mm
- 4 layers49.8 × 47.3 mm
- 2 layers59 × 91 mm
Smart doorbell
calebhabesh/doorlink
Self-hosted ESP32-S3 smart doorbell with a custom PCB, Raspberry Pi gateway, and web dashboard
108 parts1MIT
Questions
How big is the Stm32n6 v1.0 PCB?
It measures 77 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stm32n6 v1.0 use?
170 parts, built around the STM32N657X0H3Q, TPS62088YFPR, XC6206P152MR and XC6206P282MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32n6 v1.0 KiCad files?
From the cornway/ComputerVisionHw repository on GitHub, at the commit this page was made from: the board is stm32n6_v1.0/v2.0/v2.0.kicad_pcb and its schematic stm32n6_v1.0/v2.0/sheets/LCD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32n6 v1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cornway before reusing the design.