
REF1936
RWeick/REF1936-NDS-Action-Replay-Media-Player-Edition
The flash dump, schematic, and gerbers for the Datel Nintendo DS Action Replay Media Player edition

Full schematic, PCB Gerbers for the DSi Action Replay, and the rom
REF2160 is an open-source printed circuit board by RWeick, from the RWeick/REF2160-DSi-Action-Replay repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 37.6 × 62 mm with 23 parts on 104 nets.
It is built around the PIC18F14K50-I/SS and XC6206P152MR. Its parts include 8 capacitors, 7 ICs, 3 connectors, 1 resistor and 1 inductor. It belongs with the PIC boards of this library.
Full schematic, PCB Gerbers for the DSi Action Replay, and the rom
PCB Thickness: 0.8 mm

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 nF | DSi Action Replay:Little SMD | C5, C6, C7, C8 |
| 2 | 10 pF | DSi Action Replay:Little SMD | C2, C3 |
| 2 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | H1, H2 |
| 2 | USB Port | DSi Action Replay:USB Adapter | J1, J3 |
| 1 | 100 nF | DSi Action Replay:Big SMD | C1 |
| 1 | 102 | DSi Action Replay:Little SMD | R1 |
| 1 | 2.2 uH | DSi Action Replay:Ferrite Inductor | L1 |
| 1 | 450 nF | DSi Action Replay:Little SMD | C4 |
| 1 | Action_Replay_FPGA | DSi Action Replay:Raw Science FPGA | U5 |
| 1 | Board Edge Connector | DSi Action Replay:Board Edge Rear Connector | J2 |
| 1 | EN29LV320BT | GBA:SOP50P2000X120-48N | U2 |
| 1 | NDS_Cart_Edge | DSi Action Replay:Edge Connector | U1 |
| 1 | NDS_Cart_Slot | DSi Action Replay:DS Slot | U6 |
| 1 | PIC18F14K50-I/SS | DSi Action Replay:PIC18F14K50-I&slash_SS | U3 |
| 1 | TLV70033DDCT | DSi Action Replay:ODN SOT-23-5 | U7 |
| 1 | WTL K4 12 MHz | DSi Action Replay:Clock | X1 |
| 1 | XC6206P152 | DSi Action Replay:65E9 SOT-23 | U4 |

RWeick/REF1936-NDS-Action-Replay-Media-Player-Edition
The flash dump, schematic, and gerbers for the Datel Nintendo DS Action Replay Media Player edition

CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…


Jameswill-Winsock/Tempest
An FPGA based implementation to demonstrate side-channel attacks on modern cryptography algorithms such as AES, RSA, ML-KEM etc.

LeoDJ/FW-EC-DongleHiderPlus
Framework Expansion Card that includes a USB hub to hide a bare dongle inside and still have a USB-A port externally

nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.

greatscottgadgets/lab-notes
notes, test reports, and other documentation for projects in progress

ubopod/ubo-pcb
This repo contains open source PCB designs used in conjunction with Ubo Pod other open source system components.
It measures 37.6 × 62 mm and has 4 copper layers, 0.85 mm thick.
23 parts, built around the PIC18F14K50-I/SS and XC6206P152MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RWeick/REF2160-DSi-Action-Replay repository on GitHub, at the commit this page was made from: the board is REF2160.kicad_pcb and its schematic REF2160.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).