
Dya panelized
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

DYA Dash portable wireless split keyboard with 25mm trackball
Led encoder is an open-source printed circuit board by cormoran, from the cormoran/dya-dash-keyboard repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 12 × 18 mm with 12 parts on 10 nets, routed with 82 tracks and 6 vias.
It belongs with the keyboards and input boards of this library.

Firmware is available in https://github.com/cormoran/zmk-keyboard-dya-dash.
You can download pre-built binaries in the release page.
The firmware supports keymapping update with ZMK studio.
Left side schematic




4x2 LEDs indicates battery level, connected BLE/USB profiles and active layers depending on the setting. The schematic and firmware driver is optimized for battery usage. LED modules consume power only when required.
[!NOTE] The picture is old version's one

Now on sale in https://cormoran707.booth.pm/
完全なコピー品が販売された場合に対応できるように PCB 設計を流用して販売することは禁止していますが、回路設計を真似たり似たような設計のキーボードを作ることを牽制したりする意図はありません。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C_LED_MOD1, C_LED_MOD2, C_LED_MOD3, C_LED_MOD4 |
| 4 | WS2812B/C-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D_LED_MOD1, D_LED_MOD2, D_LED_MOD3, D_LED_MOD4 |
| 1 | 1.27mm connector | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J_LED_MOD1 |
| 1 | RotaryEncoder | 0_kbd_Parts:RotaryEncoder_EC12E | SW_LED_MOD1 |
The 10 most common of 12 parts.

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 12 × 18 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cormoran/dya-dash-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/dya-dash-v3/modules-pointer/led-encoder/led-encoder.kicad_pcb and its schematic hardware/dya-dash-v3/5pin-magnet-fpc/5pin-magnet-fpc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).