
Multibus mainboard
coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

Open-source eurorack synthesizer modules and related stuff.
SnackBus PSU is an open-source printed circuit board by coriolisinstruments, from the coriolisinstruments/EurorackModules repository on GitHub. It is a 2-layer board of 99 × 87 mm with 42 parts on 13 nets, routed with 351 tracks and 6 vias.
It is built around the DKE15A-12. Its parts include 12 connectors, 6 resistors, 3 capacitors, 2 diodes and 1 IC. It belongs with the audio and music and power boards of this library.
Open-source eurorack synthesizer modules. All our schematics and pcbs are developed with KiCad.
These are simple (passive) utility modules, designed to fit the Intellijel 1U spec. They are often smaller (6 or 8HP) so you can use them to fill gaps in your system. Except for the Multibus... that one takes up an entire row.
| Module | Description | |
|---|---|---|
![]() | LPG | A simple passive low-pass gate with -6dB slope in a small 1U package. |
![]() | Mute | A signal mute (momentary and latching) in a convenient 1U package. |
![]() | Mult | Dead simple passive multi. Its only feature being very small. |
| Multibus | A eurorack module for the distribution of CV signals. |
Just your regular sized eurorack modules.
| Module | Description | |
|---|---|---|
| Corona | A multi purpose vacuum tube (or valve) drive module with feedback control. |
| Thing | Description | |
|---|---|---|
![]() | PSU Companion | A companion for Bel / Condor / Power One linear power supplies. Goes inbetween the PSU and your busboards. |
| Making Vactrols | A little tutorial on making your own vactrols. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_02x08_Counter_Clockwise | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4, MH5, MH6 |
| 6 | mechanical_cooling_slot_very_large | Coriolis-KiCad:mechanical_cooling_slot_very_large | SLOT1, SLOT2, SLOT3, SLOT4, SLOT5, SLOT6 |
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 4 | LED | Coriolis-KiCad:LED_D3.0mm | D_-12V_1, D_+5V_1, D_+12V_1, D_PWR_1 |
| 3 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10, J11, J12 |
| 1 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02_Male | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | DKE15A-12 | Coriolis-KiCad:MeanWell-DKE | M1 |
| 1 | IN4004 | Coriolis-KiCad:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | IN5402 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | LM317_3PinPackage | Package_TO_SOT_THT:TO-220F-3_Horizontal_TabDown | U1 |
The 41 most common of 42 parts.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 99 × 87 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the DKE15A-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the coriolisinstruments/EurorackModules repository on GitHub, at the commit this page was made from: the board is SnackBus_PSU/hardware/SnackBus_PSU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask coriolisinstruments before reusing the design.