2 layers40.3 × 75.7 mm
2 layers29.5 × 22 mm
CE Makerverse MicroSD Card Adapter
CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter5This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
- Size
- 29.5 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 19
- Pads
- 75
- Tracks, vias
- 156, 26
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210722)
- Created
- 6 Dec 2021
- Updated
- 6 Dec 2021
Overview
CE Makerverse MicroSD Card Adapter is an open-source printed circuit board by CoreElectronics, from the CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter repository on GitHub. It is a 2-layer board of 29.5 × 22 mm with 31 parts on 19 nets, routed with 156 tracks and 26 vias.
It is built around the 74LVC125AD and AMS1117-3.3. Its parts include 7 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
2
74LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, Transceivers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMakerverse™ MicroSD Card Adapter
This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
The PCB project requires KiCAD 5.99 or later to edit but the PDF schematic is in the Documents folder.
License
This project is open source - please review the LICENSE.md file for further licensing information.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
"Makerverse" and the Makerverse logo are trademarks of Core Electronics Pty Ltd.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4k7 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | LOGO | CoreElectronics_Artwork:makerverse_logo_short_14.0x2.4mm | G***, G*** |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 74LVC125 | lib:QFN50P250X300X100-15N-D | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | Conn_01x08_Male | CoreElectronics_Components:PinHeader_1x08_P2.54mm_Vertical_SMD_Symmetric | J1 |
| 1 | G*** | kibuzzard-6110B0D8 | kibuzzard-6110B0D8 |
| 1 | G*** | kibuzzard-6110B094 | kibuzzard-6110B094 |
| 1 | G*** | kibuzzard-6110B0C8 | kibuzzard-6110B0C8 |
| 1 | G*** | kibuzzard-6111B463 | kibuzzard-6111B463 |
| 1 | G*** | kibuzzard-6110B0C2 | kibuzzard-6110B0C2 |
| 1 | G*** | kibuzzard-6110B07E | kibuzzard-6110B07E |
| 1 | G*** | kibuzzard-6110B0BA | kibuzzard-6110B0BA |
| 1 | G*** | kibuzzard-6110B06E | kibuzzard-6110B06E |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | lib:uSD-Icon-Full-Size | G*** |
| 1 | LOGO | CoreElectronics_Artwork:oshw | G*** |
| 1 | LOGO | lib:CE07926 | G*** |
| 1 | Micro_SD_Card | lib:Micro-SD-9Pin | J2 |
| 1 | SolderJumper_2_Bridged | CoreElectronics_Components:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
Questions
How big is the CE Makerverse MicroSD Card Adapter PCB?
It measures 29.5 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CE Makerverse MicroSD Card Adapter use?
31 parts, built around the 74LVC125AD and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CE Makerverse MicroSD Card Adapter KiCad files?
From the CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter repository on GitHub, at the commit this page was made from: the board is PCB/pcb.kicad_pcb and its schematic PCB/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CE Makerverse MicroSD Card Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask CoreElectronics before reusing the design.
Similar boards
- 2 layers32.4 × 25.5 mm
- 2 layers132.2 × 144.1 mm
HexKeyboard
hansliss/HexKeyboard
A 25 x 25 keypad with a LED display and many features.
83 parts1BSD-2-Clause - 2 layers85 × 56 mm
Econet AtoMMC
kgl2001/Atom_Econet_AtoMMC
Combined AtoMMC & Econet interface board for Acorn Atom
40 parts1CC-BY-SA-4.0 - 4 layers
Rocket fc
npsggehlot-cmyk/self-landing-rocket
Self-landing TVC model rocket: RocketFC flight computer PCB, avionics bay, servo chute ejector, Arduino firmware, 3D MATLAB flight simulator
104 parts - 2 layers
- 2 layers300 × 180 mm
- 4 layers85.1 × 100 mm
