
BPSMaster
corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

All code relating to solar car like: BPS, telemetry, web dev, and more.
Nucleo CAN is an open-source printed circuit board by corbosiny, from the corbosiny/SolarCar repository on GitHub. It is a 2-layer board of 59.1 × 51.4 mm with 39 parts on 40 nets, routed with 129 tracks and 27 vias.
It is built around the PDS1-S12-S9-M. Its parts include 6 capacitors, 6 resistors, 4 ICs, 4 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6 |
| 2 | 60 | Resistors_SMD:R_0805_HandSoldering | R5, R6 |
| 1 | 12V Iso Power | LEDs:LED_0805_HandSoldering | D1 |
| 1 | 12V Iso Test | Custom:Measurement_Point_2_Round-SMD-Pad_Small | T1 |
| 1 | 160 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 1k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 2.2u | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 3.3V Power | LEDs:LED_0805_HandSoldering | D4 |
| 1 | 3.3V Test | Custom:Measurement_Point_2_Round-SMD-Pad_Small | T4 |
| 1 | 330 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 510 | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 5V Iso Power | LEDs:LED_0805_HandSoldering | D2 |
| 1 | 5V Iso Test | Custom:Measurement_Point_2_Round-SMD-Pad_Small | T2 |
| 1 | 9V Power | LEDs:LED_0805_HandSoldering | D3 |
| 1 | 9V Test | Custom:Measurement_Point_2_Round-SMD-Pad_Small | T3 |
| 1 | ADM3054 | Housings_SOIC:SOIC-16W_7.5x10.3mm_Pitch1.27mm | U4 |
| 1 | CAN H Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T9 |
| 1 | CAN Input GND Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T8 |
| 1 | CAN L Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T10 |
| 1 | CAN Output GND Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T11 |
| 1 | CAN PwrSense Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T5 |
| 1 | CAN Resistors | Connectors_Samtec:SL-102-X-XX_1x02 | JP1 |
| 1 | CAN Rx Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T7 |
| 1 | CAN Tx Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | T6 |
| 1 | CAN_In | Custom:Molex-MiniFitJr-4-peg | J1 |
| 1 | CAN_Out | Custom:Molex-MiniFitJr-4-peg | J2 |
| 1 | MCP1702T-5002E/CB | TO_SOT_Packages_SMD:SOT-23W | U2 |
| 1 | Nucleo_L432KC | Nucleo:NucleoL432KC | U3 |
| 1 | PDS1-S12-S9-M | Custom:PDS1-M | U1 |
| 1 | Reset | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
The 35 most common of 39 parts.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

It measures 59.1 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the PDS1-S12-S9-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the corbosiny/SolarCar repository on GitHub, at the commit this page was made from: the board is Electronics/Nucleo CAN/Nucleo_CAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask corbosiny before reusing the design.