conorcurley5/FYP_FilesDue to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.
FYP Motor is an open-source printed circuit board by conorcurley5, from the conorcurley5/FYP_Files repository on GitHub. It is a 2-layer board of 68 × 48 mm with 43 parts on 74 nets, routed with 432 tracks and 46 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX485ED and AMS1117CD-3.3, with the LESD5D5.0CT1G and UMH3N among its other parts. Its parts include 15 resistors, 8 capacitors, 7 connectors, 6 diodes and 4 ICs. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Due to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.
There are four folders in this project:
This folder holds the code for the PlatformIO-based CCS software. The primary folder in here is "(Main)FYP Project - ESP", however older revisions of the software, and revisions for different platforms, are available also.
This folder holds all of the PCB designs for the project, including multiple revisions of the heater, and an unused design for a motor controller board.
This folder holds all of the 3D models for the project, as well as some renders used in the portfolio.
This folder holds the front-end application for the project, build with NextJS. There is only one version of this application. You'll need NodeJS installed to run these.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R8, R9, R12, R13, R15 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R16, R17, R20 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 3 | LESD5D5.0CT1G | LESD5D5.0CT1G:TVS_LESD5D5.0CT1G | D5, D6, D7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C7 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J4, J5 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW3, SW4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1, J8 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C9 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AMS1117CD-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | Conn_01x17_Socket | Connector_PinSocket_1.27mm:PinSocket_1x17_P1.27mm_Vertical | J2 |
| 1 | Conn_01x21 | Connector_PinSocket_1.27mm:PinSocket_1x21_P1.27mm_Vertical | J3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J7 |
/FYP_Motor_R2/R3_Del/FYP_Motor_R3.kicad_pcb.jpg?size=s&soon)
conorcurley5/FYP_Files
Due to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.
/FYP_Heater/FYP_Heater.kicad_pcb.jpg?size=s&soon)
conorcurley5/FYP_Files
Due to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.
Sumya99/RobotCarPCB
NAND сургалтын төвийн сурагчдад зориулсан робот машины PCB төсөл
Mellerayba/StudyWithKey
StudyWithKey is firmware for a microcontroller which controls a bluetooth remote designed for use on quizlet
kawashimaken/general-purpose-ken-interface
A modular, multi-MCU prototyping platform with a unified pin-assignment standard and horizontally-stackable expansion boards.
mornepousse/KeSp_dongle
Recepteur USB 2.4 GHz du clavier Niphargus et de la souris Conchodytes — ESP32-S3 / ESP32-P4, nRF24L01+, format M.2 Key B
It measures 68 × 48 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the ESP32-S3-WROOM-1-N8, MAX485ED, AMS1117CD-3.3 and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the conorcurley5/FYP_Files repository on GitHub, at the commit this page was made from: the board is KiCAD (PCB)/FYP_Motor/FYP_Motor/FYP_Motor.kicad_pcb and its schematic KiCAD (PCB)/FYP_Heater/FYP_Heater.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask conorcurley5 before reusing the design.