Skip to the content
2 layers100 × 54 mmD50-fram, the printed circuit board in 3D
Size
100 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
101
Nets
100
Pads
442
Tracks, vias
1,374, 292
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 May 2025
Updated
27 May 2025

Overview

D50-fram is an open-source printed circuit board by connorzheng97, from the connorzheng97/d50-fram repository on GitHub. It is a 2-layer board of 100 × 54 mm with 101 parts on 100 nets, routed with 1,374 tracks and 292 vias.

It is built around the SN74LVC4245APWRE4, SN74LV1T04DBV and FM22L16-55-TG, with the SN74LV1T126DBV, XC6206P332MR and MDR-16H among its other parts. Its parts include 54 resistors, 24 capacitors, 10 ICs, 3 connectors and 3 switches.

Main components

7

README

README.md

d50-fram

Parts

101
QtyValueFootprintReferences
21DNPResistor_SMD:R_0603_1608MetricR14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29 +5
19100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C4, C5, C10, C11, C12, C13, C17, C18, C19, C20, C21, C22, C23, C24 +3
11100KResistor_SMD:R_0603_1608MetricR37, R40, R42, R43, R44, R45, R46, R47, R48, R49, R51
93.3KResistor_SMD:R_0603_1608MetricR1, R6, R7, R8, R9, R10, R11, R12, R13
6SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6
50RResistor_SMD:R_0603_1608MetricR30, R31, R32, R52, R54
41KResistor_SMD:R_0603_1608MetricR2, R3, R4, R5
4SN74LVC4245APWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU3, U4, U8, U9
310KResistor_SMD:R_0603_1608MetricR33, R34, R35
3DNPCapacitor_SMD:C_0603_1608MetricC14, C15, C16
210uFCapacitor_SMD:C_0603_1608MetricC3, C6
2SH1.0-10Pnew:JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_HorizontalJ2, J4
2SN74LV1T04DBVPackage_TO_SOT_SMD:SOT-23-5U5, U7
122KResistor_SMD:R_0603_1608MetricR53
1D50-EDGECONNnew:EDGE1S34J1
1FM22L16-55Package_SO:TSOP-II-44_10.16x18.41mm_P0.8mmU10
1GS2011CYWnew:7Segment_0.2_SMT_GS2011DN1
1MDR-16Hnew:SW_MDR_16H_AC100GSW1
1SK-3296S-01-L1new:SW_SK3296SSW2
1SK-3296S-01-L1_ReverseMountnew:SW_SK3296S_ReverseMountSW3
1SN74HC4511M96Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1SN74LV1T126DBVPackage_TO_SOT_SMD:SOT-23-5U6
1XC6206P332MRPackage_TO_SOT_SMD:SOT-23U1

Similar boards

  • 2 layers249 × 69.5 mmHelsinki LED Train Map, the printed circuit board in 3D

    Helsinki LED Train Map

    CDFER/helsinki-live-train-map

    A physical, real-time LED map of the Auckland train network, powered by an ESP32-C3 microcontroller. Train movements are displayed using addressable RGB LEDs, with live data fetched over Wi-Fi.

    441 partsMIT
  • 2 layers28 × 28 mmNikon gps, the printed circuit board in 3D

    Nikon gps

    4x1md/nikon_gps

    DIY GPS module for Nikon DSLR

    42 parts30MIT
  • 2 layers25.6 × 40 mmSprit, the printed circuit board in 3D

    Sprit

    stevegt/sprit

    Raspberry Pi I/O interface board for Dynamixel XL-320 (and possibly others)

    14 parts1
  • 4 layers93 × 155.6 mmRocky ctrl, the printed circuit board in 3D

    Rocky ctrl

    PotatoPeaSea/Rocky

    Five-legged walking robot inspired by Rocky (Project Hail Mary).

    173 parts
  • 8 layers120 × 75 mmZynq board, the printed circuit board in 3D

    Zynq board

    xrpbot/xrpcam-hardware

    571 parts
  • 4 layers35 × 20 mmBlixten, the printed circuit board in 3D

    Blixten

    Alli-Ekundayo/scpt-rl

    SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:

    60 partsMIT
  • 2 layers180 × 174 mmZerowriter breakout board, the printed circuit board in 3D

    Zerowriter breakout board

    zerowriter/zerowriter_ink

    General repo for all things Zerowriter Ink

    660 parts46GPL-3.0

Questions

How big is the D50-fram PCB?

It measures 100 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the D50-fram use?

101 parts, built around the SN74LVC4245APWRE4, SN74LV1T04DBV, FM22L16-55-TG and SN74LV1T126DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the D50-fram KiCad files?

From the connorzheng97/d50-fram repository on GitHub, at the commit this page was made from: the board is d50_fram.kicad_pcb and its schematic d50_fram.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the D50-fram design in my own project?

Its repository states no licence, so its author keeps all rights: ask connorzheng97 before reusing the design.