
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

Open source documentation and firmware for the CH HumberLora Kit
Heltec is an open-source printed circuit board by ConnectedHumber, from the ConnectedHumber/Air-Quality-Kit repository on GitHub. It is a 2-layer board of 74.5 × 68.7 mm with 17 parts on 42 nets, routed with 122 tracks and 1 via.
It is built around the BME280. Its parts include 4 connectors, 3 switches, 2 ICs, 1 capacitor and 1 resistor.
These are KiCAD files for the PCB design version 3. Historically V1 was based on a WeMOS device, V2 was based on a Heltec to enable the use of LoRa but had a track error.
V3 also incorporates a high side switch to allow the 5V to the SDS011 sensor to be turned off when the Vext is turned off. The GPS option (3V3) is also powered from the Vext. A large capacitor has been added to the 5V input to the Heltec to prevent resets caused by the SDS011 switching on.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 5V | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | BME280 | Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | BME280_0x76 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | BME680_0x76 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Down | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | GPS | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | Heltect_Lora_32 | Heltec_Models:Heltec_LoRa_32 | U1 |
| 1 | SDS011 | Connector_JST:JST_XH_B05B-XH-AM_1x05_P2.50mm_Vertical | J2 |
| 1 | STMPS2171MTR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | Select | Button_Switch_SMD:SW_SPST_B3S-1000 | SW2 |
| 1 | Up | Button_Switch_SMD:SW_SPST_B3S-1000 | SW3 |

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker


kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome

crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone


CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
It measures 74.5 × 68.7 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ConnectedHumber/Air-Quality-Kit repository on GitHub, at the commit this page was made from: the board is PCB Designs/AQ_V3/Heltec.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ConnectedHumber before reusing the design.