Skip to the content
2 layers46.7 × 22.9 mmTransponder, the printed circuit board in 3D

Transponder

condac/openAST16

open source Axx Simulated RC Transponder

Size
46.7 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
20
Pads
73
Tracks, vias
254, 4
Routed
Yes
KiCad
KiCad 4
Created
25 Jul 2014
Updated
21 Apr 2021

Overview

Transponder is an open-source printed circuit board by condac, from the condac/openAST repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 46.7 × 22.9 mm with 26 parts on 20 nets, routed with 254 tracks and 4 vias.

Its parts include 8 capacitors, 4 resistors, 4 ICs, 4 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

NEW! Arduino code

I strongly recomend switching to the arduino based code. All future changes will be made here. It is much more easy to work with now that I have managed to get the critical timings right to send a correct signal.

To add support for attiny in Arduino follow this guide https://create.arduino.cc/projecthub/arjun/programming-attiny85-with-arduino-uno-afb829

Do note that if you try to program your attiny mounted in the transponder you need to desolder the resistor on the antenna loop or the device will not respond correctly ( giving wrong board id errors and not responding well at all etc...) And you still need to supply the chip with an own oscilator source because it do not like to use the 20mhz crystal in programming mode for some reason.

openAST

open source Axx Simulated transponder

This is for an attiny25 running at 20MHz

set fuse to -U lfuse:w:0xff:m in avrdude

To use the java program to encode run:

text
cd encoderProgram/java/dist
java -jar rctcode.jar 3456789

encode2: 0101001000010111011001000101010000000000
encodeOut:  1110000111001011111111010010100100101000000100110001110100010011001111110000
    ldi  d1,  0xe1
    ldi  d2,  0xcb
    ldi  d3,  0xfd
    ldi  d4,  0x29
    ldi  d5,  0x28
    ldi  d6,  0x13
    ldi  d7,  0x1d
    ldi  d8,  0x13
    ldi  d9,  0x3f

And the last lines you can paste in the asm file when you build your program and you have it ready to go.

To decode, input a binary string as argument (at least 12 char)

text
java -jar rctcode.jar 1110000111001011111111010010100100101000000100110001110100010011001111110000
  known decoded: 01010010000101110110010001010100000000
  known decoded int: 3456789

Parts

26
QtyValueFootprintReferences
422pFCapacitors_SMD:C_0805C1, C3, C5, C7
21kResistors_SMD:R_0805R2, R4
21nFCapacitors_SMD:C_0805C2, C6
2220Resistors_SMD:R_0805R1, R3
250uFCapacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_ReflowC4, C8
2CONN_2Connectors:PINHEAD1-2P1, P2
2DIODEDiodes_SMD:D_0805D3, D4
2L78L05_SOT89TO_SOT_Packages_SMD:SOT-89-3U1, U2
2LEDLEDs:LED_0805D1, D2
1ATTINY85-PHousings_DIP:DIP-8_W7.62mm_SocketIC1
1ATTINY85-PHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmIC2
1CRYSTALCrystals:Crystal_SMD_5032-2pin_5.0x3.2mmX2
1CRYSTALCrystals:Crystal_HC49-4H_VerticalX1
1Conn_01x02Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ1
1Conn_01x03Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ2

More from condac/openAST

2
  • 2 layers94.5 × 94.5 mmTransponder, the printed circuit board in 3D

    Transponder

    condac/openAST

    open source Axx Simulated RC Transponder

    224 parts16GPL-2.0
  • 2 layers22.9 × 22.9 mmTransponder, the printed circuit board in 3D

    Transponder

    condac/openAST

    open source Axx Simulated RC Transponder

    12 parts16GPL-2.0

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Transponder PCB?

It measures 46.7 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Transponder use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transponder KiCad files?

From the condac/openAST repository on GitHub, at the commit this page was made from: the board is circuitDesign/transponder_dualPCB/transponder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transponder design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).