

Nichrome burner
A small nichrome cutter for cut away systems
- Size
- 22.5 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 6
- Pads
- 15
- Tracks, vias
- 9, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 May 2023
- Updated
- 12 Aug 2023
Overview
Nichrome burner is an open-source printed circuit board by concretedog, from the concretedog/Burn_Baby_Burn repository on GitHub, published under the MIT licence. It is a 2-layer board of 22.5 × 10 mm with 7 parts on 6 nets, routed with 9 tracks and 0 vias.
It is built around the AO3400A. Its parts include 3 connectors, 2 resistors and 1 transistor.
Main components
1README
README.mdBurn_Baby_Burn
A small nichrome cutter for cut away systems
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery and input | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | nichrome coil | C_Dog_470:nichrome_coil_7mm | J1 |
The 6 most common of 7 parts.
Similar boards
- 4 layers149 × 95 mm

- 4 layers40 × 23 mm

- 4 layers81.2 × 96.6 mm

- 2 layers55 × 82.7 mm

- 4 layers42 × 42 mm

- 4 layers98 × 75 mm

PiFinder4
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
157 parts257GPL-3.0 - 2 layers240 × 240 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT
Questions
How big is the Nichrome burner PCB?
It measures 22.5 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nichrome burner use?
7 parts, built around the AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nichrome burner KiCad files?
From the concretedog/Burn_Baby_Burn repository on GitHub, at the commit this page was made from: the board is hardware/nichrome_burner.kicad_pcb and its schematic hardware/nichrome_burner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nichrome burner design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).