

Pi Adapter
Open source FPP PB16 Pixel Controller
- Size
- 65 × 35.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 36
- Pads
- 137
- Tracks, vias
- 221, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2019
- Updated
- 5 Oct 2026
Overview
Pi Adapter is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 65 × 35.8 mm with 18 parts on 36 nets, routed with 221 tracks and 51 vias.
It is built around the 24LC256T-I/SN, RC0603JR-074K7L and PPTC041LFBN-RC, with the PPPC202LFBN-RC, SBH11-PBPC-D20-ST-BK and Z-S311024S1GK1A among its other parts. Its parts include 6 connectors, 2 resistors, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
624LC256T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMRC0603JR-074K7L
UncategorisedUnknown makerPPTC041LFBN-RC
插件,P=2.54mm-40℃~+105℃ 1 1x4P 2.54mm 250V 3A 4P 8.51mm Phosphor bronze Square Hole Through Hole Tin Top Plugin,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale HeadersPPPC202LFBN-RC
插件,P=2.54mm-40℃~+105℃ 2 2.54mm 2.54mm 250V 3A 40P 8.51mm Gold Phosphor bronze Square Hole Through Hole 插件,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale HeadersSBH11-PBPC-D20-ST-BK
直插,P=2.54mmStraight,P=2.54mm Wire To Board Connector ROHSSullins Connector SolutionsWire To Board ConnectorZ-S311024S1GK1A
插件,P=2.54mm12 2 2.54mm 2.54mm 2x12P Brass Gold IDC Header Through Hole 插件,P=2.54mm IDC Connectors ROHSNextronIDC Connectors
README
PB16_2_PI/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PB16-2-PI
This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.
To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 3mm_Mounting_Hole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 24LC256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | LOGO | Scotts:chewi_15 | G*** |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | PIN_3_JMP | Scotts:SolderJumper-3_P1mm_Bridged12 | JP1 |
| 1 | PIN_4_JMP | Scotts:SolderJumper-3_P1mm_Bridged23 | JP2 |
| 1 | PWR_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | v3 Output Header | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J4 |
| 1 | v4 Output Header | Connector_IDC:IDC-Header_2x12_P2.54mm_Vertical | J5 |
The 16 most common of 18 parts.
More from computergeek1507/PB_16
12- 2 layers142.1 × 106 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 99.9 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 93 mm

- 2 layers151.1 × 93.4 mm

- 2 layers148.1 × 102.6 mm

- 2 layers148.6 × 76.4 mm

- 2 layers83.2 × 71.4 mm

- 2 layers100 × 90.4 mm

- 2 layers148.6 × 75.5 mm

- 2 layers90.1 × 71.4 mm

Similar boards
- 2 layers142.1 × 99.9 mm

- 2 layers65 × 56 mm

- 2 layers73 × 94 mm

Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 4 layers65 × 64.5 mm

- 2 layers54.1 × 51.9 mm

- 8 layers320 × 380 mm

- 2 layers21.9 × 51.7 mm

Io jumper
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
13 parts384 - 2 layers65 × 30.5 mm

Questions
How big is the Pi Adapter PCB?
It measures 65 × 35.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pi Adapter use?
18 parts, built around the 24LC256T-I/SN, RC0603JR-074K7L, PPTC041LFBN-RC and PPPC202LFBN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pi Adapter KiCad files?
From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Pi_Adapter/Pi_Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pi Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.