
Digital Clock 6 Digits
koson/Digital_Clock_6_Digits
โครงงานนี้ใช้วิธีการเดินสายด้วย Wire wrapping เพื่อลดขั้นตอนในการทำ PCB และเป็นการฝึกให้นักศึกษาได้บัดกรีวงจรที่มีความซับซ้อนในระดับที่เหมาะสม

Simple module for a two-digit 7-segment display
7Segment is an open-source printed circuit board by mikegoelzer, from the mikegoelzer/7seg-2digit repository on GitHub. It is a 2-layer board of 54.1 × 51.9 mm with 27 parts on 94 nets, routed with 286 tracks and 34 vias.
It is built around the DA56-11SURKWA, NL27WZ14DFT2G-Q and PH2RA-12-UA, with the PPPC202LFBN-RC among its other parts. Its parts include 10 connectors, 8 resistors, 2 capacitors and 2 ICs. It belongs with the fPGA and programmable logic and lEDs and displays boards and the FPGA and CPLD boards of this library.
This repository contains the design files for a 2-digit 7-segment display PMOD, modeled after the Digilent PMOD design but without a dual-row Dupont male header pinout. The display is designed for 3.3V operation and uses multiplexing to control both digits using only 8 GPIOs (7 for segments, one for left/right digit select).

The schematic for this design can be found in the docs/schematic.pdf file.
7Seg-Kicad/: KiCad project filesbom/: Excel sheet with Digikey/Mouser part numbersdocs/: Documentation, including the schematic PDFimg/: Images, including the 3D renderingParts/: Parts imported into Kicad projectThis PCB can be used with any FPGA or microcontroller board, although it uses a non-standard pinout (for PMODs). The multiplexed design allows for efficient control of both digits using minimal GPIO pins.
We welcome contributions to improve this design. Please feel free to submit issues or pull requests.
This design is inspired by the Digilent PMOD 7-segment display but has been modified to fit a custom board and does not conform to the normal PMOD pinout.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 820 | PCM_Resistor_SMD_AKL:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | VAL** | Mousebites:mouse-bite-2.54mm-slot | mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot, mouse-bite-2.54mm-slot |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J6, J7 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J8 |
| 1 | DA56-11SURKWA | Display_7Segment:DA56-11SURKWA | U2 |
| 1 | NL27WZ14DFT2G | 7Seg Imported Footprints:SC70-6_ONS | U1 |
| 1 | PH2RA-12-UA | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | PPPC202LFBN-RC | 7Seg Imported Footprints:SULLINS_PPPC202LFBN-RC | J5 |
The 26 most common of 27 parts.

koson/Digital_Clock_6_Digits
โครงงานนี้ใช้วิธีการเดินสายด้วย Wire wrapping เพื่อลดขั้นตอนในการทำ PCB และเป็นการฝึกให้นักศึกษาได้บัดกรีวงจรที่มีความซับซ้อนในระดับที่เหมาะสม


GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)


mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU



It measures 54.1 × 51.9 mm and has 2 copper layers, 1.65 mm thick.
27 parts, built around the DA56-11SURKWA, NL27WZ14DFT2G-Q, PH2RA-12-UA and PPPC202LFBN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mikegoelzer/7seg-2digit repository on GitHub, at the commit this page was made from: the board is 7Seg-Kicad/7Segment.kicad_pcb and its schematic 7Seg-Kicad/7Segment.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mikegoelzer before reusing the design.