

Pwr Diff Expansion
Open source FPP PB16 Pixel Controller
- Size
- 63.8 × 85.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 43
- Pads
- 138
- Tracks, vias
- 157, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2019
- Updated
- 5 Oct 2026
Overview
Pwr Diff Expansion is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 63.8 × 85.1 mm with 24 parts on 43 nets, routed with 157 tracks and 0 vias.
It is built around the AM26C31QD, RJ45 and SB5100-T. Its parts include 5 connectors, 4 fuses, 3 diodes, 2 resistors and 1 capacitor.
Main components
3AM26C31QD
SOIC-16-40℃~+125℃ 1 100uA 20mA 20mA 4 4.5V~5.5V 7ns@5V Tri-State Unidirectional SOIC-16 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedSB5100-T
DO-201AD-65℃~+150℃ 1 Independent 100V 150A 500uA@100V 5A 800mV@5A DO-201AD Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
PB16_2_PI/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PB16-2-PI
This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.
To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 3544-2 | Keystone_Fuse:FUSE_3544-2 | F1, F2, F3, F4 |
| 4 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J1, J2, J3, J4 |
| 1 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 120 | Resistor_THT:R_Array_SIP8 | RN1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V LED | LED_THT:LED_D3.0mm_Clear | D3 |
| 1 | AM26C31 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Expansion Header | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J5 |
| 1 | Power In | Barrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P8.26MM | TB1 |
| 1 | SB5100-T | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | VIN LED | LED_THT:LED_D3.0mm_Clear | D2 |
The 18 most common of 24 parts.
More from computergeek1507/PB_16
12- 2 layers142.1 × 106 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 99.9 mm

- 2 layers148.8 × 116.9 mm

- 2 layers142.1 × 93 mm

- 2 layers151.1 × 93.4 mm

- 2 layers148.1 × 102.6 mm

- 2 layers148.6 × 76.4 mm

- 2 layers83.2 × 71.4 mm

- 2 layers100 × 90.4 mm

- 2 layers148.6 × 75.5 mm

- 2 layers90.1 × 71.4 mm

Similar boards
- 2 layers50 × 50 mm

- 2 layers147.3 × 154.4 mm

- 2 layers150.1 × 73.9 mm

Relay Module
MSTRocketDesignTeam/TestStand-Instrumentation-PCB
Rocket Team's Instrumentation Interface PCB
49 partsGPL-3.0 - 2 layers34.3 × 87.9 mm

- 2 layers70 × 85 mm

Hand pcb
bot-hoven/bot-hoven-electrical
Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.
65 parts - 2 layers60.7 × 68.1 mm

- 2 layers120.7 × 141 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
Questions
How big is the Pwr Diff Expansion PCB?
It measures 63.8 × 85.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pwr Diff Expansion use?
24 parts, built around the AM26C31QD, RJ45 and SB5100-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pwr Diff Expansion KiCad files?
From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Pwr_Diff_Expansion/Pwr_Diff_Expansion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pwr Diff Expansion design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.