Skip to the content
2 layers60.2 × 85.1 mmPwr Diff Breakout, the printed circuit board in 3D

Pwr Diff Breakout

computergeek1507/PB_1678

Open source FPP PB16 Pixel Controller

Size
60.2 × 85.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
23
Pads
78
Tracks, vias
88, 2
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Aug 2019
Updated
5 Oct 2026

Overview

Pwr Diff Breakout is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 60.2 × 85.1 mm with 19 parts on 23 nets, routed with 88 tracks and 2 vias.

It is built around the RJ45 and SB5100-T. Its parts include 5 connectors, 4 fuses, 2 diodes and 1 resistor. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

PB16_2_PI/README.md

Copyright and Disclaimer

Copyright: Scott Hanson

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

PB16-2-PI

This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.

To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Image of PI Adapter

Parts

19
QtyValueFootprintReferences
5RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ1, J2, J3, J4, J5
43544-2Keystone_Fuse:FUSE_3544-2F1, F2, F3, F4
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Power InBarrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P8.26MMTB1
1SB5100-TDiode_THT:D_DO-201AD_P12.70mm_HorizontalD1
1VIN LEDLED_THT:LED_D3.0mm_ClearD2

The 13 most common of 19 parts.

More from computergeek1507/PB_16

12
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    116 parts78
  • 2 layers142.1 × 99.9 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    112 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers142.1 × 93 mmPi Zero W 16, the printed circuit board in 3D

    Pi Zero W 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layers148.1 × 102.6 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    90 parts78
  • 2 layers148.6 × 76.4 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    83 parts78
  • 2 layers83.2 × 71.4 mmReceiver Out, the printed circuit board in 3D

    Receiver Out

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    68 parts78
  • 2 layers100 × 90.4 mmPi Zero 24 Diff, the printed circuit board in 3D

    Pi Zero 24 Diff

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    62 parts78
  • 2 layers148.6 × 75.5 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    59 parts78
  • 2 layers90.1 × 71.4 mmWingsStation, the printed circuit board in 3D

    WingsStation

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    57 parts78

Similar boards

  • 2 layers147.3 × 154.4 mmAA PwrSens Dist, the printed circuit board in 3D

    AA PwrSens Dist

    AESilky/ack-ack

    Ack-Ack Robot - Rover (Mars style)

    172 parts
  • 2 layers150.1 × 73.9 mmRelay Module, the printed circuit board in 3D

    Relay Module

    MSTRocketDesignTeam/TestStand-Instrumentation-PCB

    Rocket Team's Instrumentation Interface PCB

    49 partsGPL-3.0
  • 2 layers34.3 × 87.9 mmBattery hot swap, the printed circuit board in 3D

    Battery hot swap

    ryos17/robosub-ee

    Stanford Robosub Electrical Repository

    16 parts1
  • 2 layers70 × 85 mmHand pcb, the printed circuit board in 3D

    Hand pcb

    bot-hoven/bot-hoven-electrical

    Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.

    65 parts
  • 2 layers60.7 × 68.1 mmFour Out, the printed circuit board in 3D

    Four Out

    kitspace-test-repos/kicad6-file-collection

    27 partsMIT
  • 2 layers120.7 × 141 mmPBB, the printed circuit board in 3D

    PBB

    koson/Electronics

    Contains all Schematics/PCB files for each electrical system.

    57 parts
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333

Questions

How big is the Pwr Diff Breakout PCB?

It measures 60.2 × 85.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pwr Diff Breakout use?

19 parts, built around the RJ45 and SB5100-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pwr Diff Breakout KiCad files?

From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Pwr_Diff_Breakout/Pwr_Diff_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pwr Diff Breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.