
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

Code for ball balancing robot made for ME556: Mechatronics. Somewhat works.
ME556 Electrical is an open-source printed circuit board by ColePatterson5, from the ColePatterson5/Ball-Balancing-Robot repository on GitHub. It is a 2-layer board with 9 parts on 75 nets, routed with 135 tracks and 4 vias.
It is built around the TEENSY 4.1. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Ball balancing robot made for ME556: Mechatronics. Somewhat works. Code and some Kicad files for custom PCB. Not sure where the schematic and pcb files have gone.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | ~ | 01_My_Custom:FIT0441_Motor_Pads | M1, M2, M3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 5V1, 12to5V1 |
| 1 | Conn_01x02_Pin | 01_My_Custom:Power_Pads | 12V1 |
| 1 | Teensy4.1 | Teensy_Footprint:Teensy41 | U2 |
| 1 | ~ | 01_My_Custom:ELRS_Receiver | U1 |
| 1 | ~ | 01_My_Custom:BNO055 | A1 |

newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels





jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
9 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ColePatterson5/Ball-Balancing-Robot repository on GitHub, at the commit this page was made from: the board is PCB Design/ME556_Electrical.kicad_pcb and its schematic PCB Design/ME556_Electrical.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ColePatterson5 before reusing the design.