Skip to the content
2 layersHandheld Modular Device, the printed circuit board in 3D

Handheld Modular Device

Col9362/Handheld_Modular_Device

A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
40
Pads
78
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
29 Aug 2026
Updated
20 Oct 2026

Overview

Handheld Modular Device is an open-source printed circuit board by Col9362, from the Col9362/Handheld_Modular_Device repository on GitHub. It is a 2-layer board with 6 parts on 40 nets.

Its parts include 2 connectors and 1 resistor. It belongs with the RP2040 boards of this library.

README

README.md

Handheld Modular Device

A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

More details and photos: https://colezuckerman.com/projects/modular-handheld/

Repository layout

FolderContents
base/KiCad project for the base unit (Raspberry Pi Pico, display connector, buzzers, pogo connector)
base/gerbers/Manufacturing files for the base unit PCB
base/backup-2026-06-27/Earlier snapshot of the base unit KiCad project
gaming-module/Gaming controller module (MCP23017 buttons, joystick, haptics)
gaming-module/gerbers/Manufacturing files for the gaming module PCB
firmware/MicroPython code that runs on the base unit's Pico

Gaming module note

The original KiCad project files for the gaming module were lost. The Gerbers in gaming-module/gerbers/ are the exact files the board was manufactured from. schematic.png is a screenshot of the original schematic, and preview-top.png / preview-bottom.png are renders of the board.

Firmware

Copy everything in firmware/ to the root of the Pico's filesystem (for example with Thonny). main.py runs at boot.

Parts

6
QtyValueFootprintReferences
2BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1, BZ2
1Display_ConnectorConnector_FFC-FPC:Amphenol_F32R-1A7x1-11018_1x18-1MP_P0.5mm_HorizontalJ1
1Pogo_ConnectorConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1R_USResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1

More from Col9362/Handheld_Modular_Device

1
  • 2 layers85 × 65 mmHandheld Modular Device, the printed circuit board in 3D

    Handheld Modular Device

    Col9362/Handheld_Modular_Device

    A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

    7 parts

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

What parts does the Handheld Modular Device use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Handheld Modular Device KiCad files?

From the Col9362/Handheld_Modular_Device repository on GitHub, at the commit this page was made from: the board is base/backup-2026-06-27/Handheld Modular Device.kicad_pcb and its schematic base/Handheld Modular Device.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Handheld Modular Device design in my own project?

Its repository states no licence, so its author keeps all rights: ask Col9362 before reusing the design.