Skip to the content
2 layers85 × 65 mmHandheld Modular Device, the printed circuit board in 3D

Handheld Modular Device

Col9362/Handheld_Modular_Device

A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

Size
85 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
41
Pads
80
Tracks, vias
168, 16
Pours
12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Aug 2026
Updated
20 Oct 2026

Overview

Handheld Modular Device is an open-source printed circuit board by Col9362, from the Col9362/Handheld_Modular_Device repository on GitHub. It is a 2-layer board of 85 × 65 mm with 7 parts on 41 nets, routed with 168 tracks and 16 vias.

Its parts include 2 resistors and 2 connectors. It belongs with the RP2040 boards of this library.

README

README.md

Handheld Modular Device

A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

More details and photos: https://colezuckerman.com/projects/modular-handheld/

Repository layout

FolderContents
base/KiCad project for the base unit (Raspberry Pi Pico, display connector, buzzers, pogo connector)
base/gerbers/Manufacturing files for the base unit PCB
base/backup-2026-06-27/Earlier snapshot of the base unit KiCad project
gaming-module/Gaming controller module (MCP23017 buttons, joystick, haptics)
gaming-module/gerbers/Manufacturing files for the gaming module PCB
firmware/MicroPython code that runs on the base unit's Pico

Gaming module note

The original KiCad project files for the gaming module were lost. The Gerbers in gaming-module/gerbers/ are the exact files the board was manufactured from. schematic.png is a screenshot of the original schematic, and preview-top.png / preview-bottom.png are renders of the board.

Firmware

Copy everything in firmware/ to the root of the Pico's filesystem (for example with Thonny). main.py runs at boot.

Parts

7
QtyValueFootprintReferences
2BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1, BZ2
1100ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
11kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1Display_ConnectorConnector_FFC-FPC:Amphenol_F32R-1A7x1-11018_1x18-1MP_P0.5mm_HorizontalJ1
1Pogo_ConnectorConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1

More from Col9362/Handheld_Modular_Device

1
  • 2 layersHandheld Modular Device, the printed circuit board in 3D

    Handheld Modular Device

    Col9362/Handheld_Modular_Device

    A handheld built around hot-swappable control modules. Modules attach to the base unit through an 8-pin pogo connector, and the base detects which module is attached over I2C plus a resistor-divider ID line.

    6 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Handheld Modular Device PCB?

It measures 85 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Handheld Modular Device use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Handheld Modular Device KiCad files?

From the Col9362/Handheld_Modular_Device repository on GitHub, at the commit this page was made from: the board is base/Handheld Modular Device.kicad_pcb and its schematic base/Handheld Modular Device.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Handheld Modular Device design in my own project?

Its repository states no licence, so its author keeps all rights: ask Col9362 before reusing the design.