

Epu interface
Interface hardware for communications with EPU.
- Size
- 50.4 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 48
- Pads
- 138
- Tracks, vias
- 520, 43
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Oct 2022
- Updated
- 19 Oct 2022
Overview
Epu interface is an open-source printed circuit board by cnpem-emi, from the cnpem-emi/epu-interface-hw repository on GitHub. It is a 2-layer board of 50.4 × 100 mm with 17 parts on 48 nets, routed with 520 tracks and 43 vias.
It is built around the 74LS245SC. Its parts include 5 capacitors, 5 connectors and 3 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RJ11 | Controle:RJ11_2 | J2, J3, J4, J5 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5 |
| 2 | , | ||
| 2 | 10k | Resistor_THT:R_Array_SIP9 | RN1, RN2 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 74LS245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2, U3 |
| 1 | SPIxxCON | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | XRA1405 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers365.8 × 254 mm

Raemixx500
SukkoPera/Raemixx500
Open Hardware Remake of the Commodore Amiga 500+ Mainboard
372 parts316 - 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers182.9 × 172.7 mm

- 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 2 layers135.3 × 106.7 mm

- 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers89.5 × 77.5 mm

Apple2-IO RPi
tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O
24 parts140MIT
Questions
How big is the Epu interface PCB?
It measures 50.4 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Epu interface use?
17 parts, built around the 74LS245SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Epu interface KiCad files?
From the cnpem-emi/epu-interface-hw repository on GitHub, at the commit this page was made from: the board is epu-interface.kicad_pcb and its schematic epu-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Epu interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask cnpem-emi before reusing the design.