Skip to the content
2 layers64 × 44 mmEsp32 with adc, the printed circuit board in 3D

Esp32 with adc

cnlohr/esp32_max11933

Let's just see what happens when you slap em together?

Size
64 × 44 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
69
Pads
283
Tracks, vias
645, 97
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
2 Oct 2018
Updated
6 Nov 2018

Overview

Esp32 with adc is an open-source printed circuit board by cnlohr, from the cnlohr/esp32_max1193 repository on GitHub. It is a 2-layer board of 64 × 44 mm with 59 parts on 69 nets, routed with 645 tracks and 97 vias.

It is built around the CP2104EK, ESP32-WROOM-32 and MAX1193ETI+, with the LAN8720A-CP among its other parts. Its parts include 18 capacitors, 17 resistors, 8 connectors, 7 ICs and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

4

README

README.md

esp32_max1193

Let's just see what happens when you slap em together?

I built the boards, but haven't had any time to test them yet - Nov 6, 2018

Parts

59
QtyValueFootprintReferences
7100R_0603R9, R10, R13, R14, R15, R17, R18
6.1uC_0603C5, C6, C8, C15, C16, C18
4~1pinP5, P6, P7, P8
3.33uC_0603C11, C12, C13
31nC_0603C1, C3, C4
3270R_0603R1, R2, R4
34.7kR_0603R5, R12, R16
21uC_0603C2, C9
2220pFC_0805C10, C17
2470nHR_0805L1, L2
275R_0603R8, R11
2MCP1824SOT-23-5U5, U7
2Q_NPN_BECSOT-23Q1, Q2
2RCARCA-PJRAN1X1U02XP3, P4
110uC_0603C7
112.1kR_0603R3
12.2uFC_0603C14
1270R_0805R6
149.9NETWORK1206RN1
1CONN_01X07USB_Micro-B_10103594-0001LFP2
1CONN_01X08RJ45_8P1
1CP2104Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mmU8
1ESP32-WROOMESP32-WROOMU3
1FBR_0805FB1
1GRNLED_0805D1
1LAN8720AHousings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mmU2
1MAX1193QFN-28-1EP_5x5mm_Pitch0.5mmU6
1NOR-NC7SZ02P5XSOT-23-5U1
1REDLED_0805D2
1S553-5999-52BELFuse-S553T1

Similar boards

  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers40 × 68 mmMULTIGW, the printed circuit board in 3D

    MULTIGW

    nuclearcat/ESP32ETH

    Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible

    32 parts30LGPL-2.1
  • 4 layers34 × 112 mmPoe led bars, the printed circuit board in 3D

    Poe led bars

    lucysrausch/poe-led-bar

    Hardware design files for PoE+ (802.3at Type 2) powered adressable LED bars based on ESP32 and WLED

    83 parts4
  • 4 layers70 × 60 mmTanklevel, the printed circuit board in 3D

    Tanklevel

    Th3Link/tanklevel

    This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.

    80 parts4CERN-OHL-S-2.0
  • 4 layers42.1 × 72 mmFrakfurt eth, the printed circuit board in 3D

    Frakfurt eth

    grodansparadis/can4vscp-frankfurt-eth

    Frankfurt Ethernet to CAN4VSCP bridge

    71 parts2
  • 4 layers119 × 39 mmController Room, the printed circuit board in 3D

    Controller Room

    crexodon/LED-Window-Matrix-Neo

    Turning the campus building into a led display

    79 partsMIT

Questions

How big is the Esp32 with adc PCB?

It measures 64 × 44 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32 with adc use?

59 parts, built around the CP2104EK, ESP32-WROOM-32, MAX1193ETI+ and LAN8720A-CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32 with adc KiCad files?

From the cnlohr/esp32_max1193 repository on GitHub, at the commit this page was made from: the board is hardware/esp32_with_adc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32 with adc design in my own project?

Its repository states no licence, so its author keeps all rights: ask cnlohr before reusing the design.