

Ch570funprog withuart
CH570-based RISC-V Programmer
- Size
- 34.6 × 10.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 27
- Pads
- 110
- Tracks, vias
- 335, 55
- Pours
- 138
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jun 2026
- Updated
- 29 Oct 2026
Overview
Ch570funprog withuart is an open-source printed circuit board by cnlohr, from the cnlohr/ch570funprog repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.6 × 10.9 mm with 27 parts on 27 nets, routed with 335 tracks and 55 vias.
It is built around the AMS1117-3.3 and CH572D. Its parts include 10 resistors, 6 capacitors, 3 ICs, 2 connectors and 1 diode.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCH572D
QFN-20-EP(3x3)UncategorisedWCH (Nanjing Qinheng Microelectronics)
README
README.mdch570funprog
Project Status: It works, in a pinch, but hardware and software is still evolving.
CH570-based programmer for CH32 microcontrollers.
Hardware Note
- You must connect an external 1.5k to 10k pull-up resistor between SWIO and VDD
General Game Plan
- Be a cheap, minichlink-compatible programmer programming over USB
- Test on ch32v00x for SWIO mode (and tune)
- Test on more boards (And tune SWD)
- Be a iSLER gateway.
- Enable flashing of slave processors over iSLER.
- Enable self-program over iSLER
Some Developer Notes
- To force-enter SWD mode, hold D+ high.
- You will need to
minichlink -Pto enable writing to the 570.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5, R6, R8, R9, R10 |
| 6 | 2.2u | Resistor_SMD:R_0402_1005Metric | C1, C2, C3, C4, C5, C6 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric | R4, R7 |
| 2 | Tooling Hole | cnhardware:ToolingHole_JLCPCB | H1, H2 |
| 1 | 32M | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | CH572D | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | PGM | cnhardware:EDGE_02x04_2.54mm | J2 |
| 1 | PMOS-SI2301CDS-T1-GE3 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | USBPROT | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | cnhardware:USB_C_MOD_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from cnlohr/ch570funprog
1- 2 layers34.6 × 10.9 mm

Similar boards
- 4 layers19.1 × 16.8 mm

SynthPass
JackToaster/SynthPass
An open-source protocol & hardware design for to detect nose boops & transfer simple data, designed for protogen/synth fursuits
17 parts4GPL-3.0 - 4 layers76.1 × 70.7 mm

Usb sp dev
Ismael034/usbsp
Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions.
79 parts2MIT - 2 layers17.8 × 28.9 mm

CH572
cyao1234/c57
Low-cost bluetooth devboard with a ch572 MCU. To program it press the boot button, and use either mountriver studio or ch32fun.
23 partsCERN-OHL-P-2.0 - 2 layers90 × 64 mm

Divine light
tobycm/divine-light
A handheld device with neopixels so you can have lights wherever you want :b
88 partsMIT - 2 layers28 × 34.5 mm

Ch570-led halo
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
30 parts114 - 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
Questions
How big is the Ch570funprog withuart PCB?
It measures 34.6 × 10.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ch570funprog withuart use?
27 parts, built around the AMS1117-3.3 and CH572D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ch570funprog withuart KiCad files?
From the cnlohr/ch570funprog repository on GitHub, at the commit this page was made from: the board is hardware-withuart/ch570funprog-withuart.kicad_pcb and its schematic hardware-withuart/ch570funprog-withuart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ch570funprog withuart design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).