Skip to the content
4 layers90.2 × 95.9 mmCameraHub, the printed circuit board in 3D
Size
90.2 × 95.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
79
Nets
66
Pads
335
Tracks, vias
596, 62
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Jun 2024
Updated
19 Nov 2024

Overview

CameraHub is an open-source printed circuit board by cmu-argus, from the cmu-argus/Avionics-CameraHub repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 79 parts on 66 nets, routed with 596 tracks and 62 vias.

It is built around the USBLC6-2P6 and USB2514B-I/M2. Its parts include 24 capacitors, 15 resistors, 8 ICs, 6 connectors and 4 diodes.

Main components

2

Parts

79
QtyValueFootprintReferences
130.1uFCapacitor_SMD:C_0603_1608MetricC3, C6, C7, C8, C9, C10, C11, C12, C14, C16, C17, C19, C21
8MountingHole_PadCameraHub:MountingHole_USBH5, H6, H7, H8, H9, H10, H11, H12
4100uFCapacitor_SMD:C_0805_2012MetricC13, C15, C18, C20
410KResistor_SMD:R_0603_1608MetricR8, R9, R10, R11
4330RResistor_SMD:R_0603_1608MetricR12, R13, R14, R15
436KResistor_SMD:R_0603_1608MetricR3, R4, R5, R6
4600RInductor_SMD:L_0603_1608MetricFB1, FB2, FB3, FB4
4744230900CameraHub:CHIP_230900_WREFL1, FL2, FL3, FL4
4GreenLED_SMD:LED_0603_1608MetricD1, D2, D3, D4
4MountingHole_PadCameraHub:MountingHole2H1, H2, H3, H4
4USBLC6-2P6Package_TO_SOT_SMD:SOT-23-6U1, U2, U3, U4
4USB_C_Receptacle_USB2.0_16PCameraHub:USBC-121SMT-4BS2SJ1, J2, J3, J4
31uFCapacitor_SMD:C_0603_1608MetricC5, C22, C23
227pFCapacitor_SMD:C_0603_1608MetricC1, C2
2MIC2026-1xMPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6, U7
1100KResistor_SMD:R_0603_1608MetricR2
112KResistor_SMD:R_0603_1608MetricR7
11MResistor_SMD:R_0603_1608MetricR1
1200528-0100Connector_FFC-FPC:Molex_200528-0100_1x10-1MP_P1.00mm_HorizontalJ6
122uFCapacitor_SMD:C_0603_1608MetricC24
124MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
14.7uFCapacitor_SMD:C_0603_1608MetricC4
1Conn_01x01TestPoint:TestPoint_Pad_D1.0mmnRST
1Header 01x04 0.1"Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1TLV76733QWDRBxQ1Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mmU8
1USB2514B-I/M2Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mmU5

Similar boards

  • 4 layers110 × 100 mmBitcart, the printed circuit board in 3D

    Bitcart

    skot/bitcart

    Raspberry Pi CM4 based antminer control board

    134 parts23
  • 4 layers40 × 55 mmCM4 Carrier, the printed circuit board in 3D

    CM4 Carrier

    xwlred/OpenHD-CM4-Carrier-Board

    [Shelved] RPI CM4 carrier for use in OpenHD

    73 parts14LGPL-2.1
  • 4 layers80 × 70 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    vega-d/CM4-nano-carrierboard

    A simplified carrier board for RPI CM4 module featuring reduced footprint.

    66 parts11GPL-3.0
  • 4 layers90 × 74 mmVERTECS CCB A, the printed circuit board in 3D

    VERTECS CCB A

    ezrafielding/vertecs-ccb

    The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.

    203 parts7CERN-OHL-P-2.0
  • 4 layers175.8 × 65.1 mmBachelor Main PCB, the printed circuit board in 3D

    Bachelor Main PCB

    fiskebolle30/Bachelor_Electronics_hardware

    All PCB design files for the bachelor project. Project is made in KiCad

    231 parts1
  • 2 layers299.3 × 93.1 mmHAT CM4 base, the printed circuit board in 3D

    HAT CM4 base

    ConnectBox/Circuit-Design

    Connectbox Circuit Design

    178 parts
  • 4 layers160 × 90 mmCmb cat, the printed circuit board in 3D

    Cmb cat

    rassom-anatol/cmb-cat

    Cortex Motion Base for EtherCAT

    151 parts

Questions

How big is the CameraHub PCB?

It measures 90.2 × 95.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the CameraHub use?

79 parts, built around the USBLC6-2P6 and USB2514B-I/M2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CameraHub KiCad files?

From the cmu-argus/Avionics-CameraHub repository on GitHub, at the commit this page was made from: the board is CameraHub.kicad_pcb and its schematic CameraHub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CameraHub design in my own project?

Its repository states no licence, so its author keeps all rights: ask cmu-argus before reusing the design.