

Camera control board
Board to control OpenMV Camera Clones
- Size
- 90 × 96 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 349
- Pads
- 903
- Tracks, vias
- 4,079, 242
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Sep 2024
- Updated
- 21 Oct 2024
Overview
Camera control board is an open-source printed circuit board by cmu-argus-2, from the cmu-argus-2/Avionics-Cameraboard repository on GitHub. It is a 6-layer board of 90 × 96 mm with 97 parts on 349 nets, routed with 4,079 tracks and 242 vias.
It is built around the IS42S32800J-7TLI, XC6210B332MR and CAS-120TA, with the MPZ1608S181ATAH0 among its other parts. Its parts include 35 resistors, 34 capacitors, 9 connectors, 8 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
4IS42S32800J-7TLI
TSOP-86-10.2mm-40℃~+85℃ 143MHz 256Mbit 3V~3.6V High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh TSOP-86-10.2mm SDRAM ROHSISSISDRAMXC6210B332MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 450mV@(800mA) 5.5V 70dB@(1kHz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCAS-120TA
SMD-3P,5.4x3.9mm-40℃~+85℃ 100mA 2.5mm 3.9mm 5.4mm 50V J-Lead SPDT Surface Mount,Vertical White SMD-3P,5.4x3.9mm Slide Switches ROHSNidecSlide SwitchesMPZ1608S181ATAH0
0603-55℃~+125℃ 1 180Ω@100MHz 2A 50mΩ ±25% 0603 Ferrite Beads ROHSTDKFerrite Beads
README
README.mdcamera-control-board
Board to control OpenMV Camera Clones. The first draft of this board will be to create the interface between the MCU (the STM32H743IIT6) and the similar QFP SDRAM chip, along with a USB and camera interface.
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R10, R16, R17, R18, R19, R20, R21, R22, R24, R25, R29, R30, R31, R32, R33 +6 |
| 15 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C12, C13, C14, C15, C16, C17, C25, C27, C28, C29, C30, C31, C32 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11, C19, C24, C34 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C22, C23 |
| 4 | 4.7K | Resistor_SMD:R_0603_1608Metric | R3, R11, R27, R28 |
| 4 | 47uF | Capacitor_SMD:C_0805_2012Metric | C2, C18, C26, C33 |
| 4 | 4pF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C20, C21 |
| 2 | 01x09 M 2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J4, J8 |
| 2 | 02x05 M 1.27mm | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1, J5 |
| 2 | 104031-0811 | Connector_Card:microSD_HC_Molex_104031-0811 | J3, J9 |
| 2 | 12MHz/7pF | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1, Y2 |
| 2 | 150141M173100 | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D1, D2 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R26 |
| 2 | 330R | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 560R | Resistor_SMD:R_0603_1608Metric | R6, R23 |
| 2 | DF12NB-36DS-0.5V_51_ | Argus_Connectors:HRS_DF12NB-36DS-0.5V_51_ | J2, J7 |
| 2 | IS42S32800J-7TLI | Argus_ICs:SOP50P1176X120-86N | U3, U8 |
| 2 | STM32H743IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U1, U6 |
| 2 | W25Q256JVEIQ TR | Argus_ICs:WSON8_E_WIN-L | U2, U7 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | AP7366-28W5-7 | Argus_ICs:SOT95P285X140-5N | VR1 |
| 1 | CAS-120TA | Argus_Misc:CAS-120TA | SW1 |
| 1 | MPZ1608S181ATAH0 | Argus_Misc:IND_1608_TDK | L1 |
| 1 | MPZx_x | Argus_Misc:IND_1608_TDK | L2 |
| 1 | SW_Push | Argus_Misc:BTN_KMR2 | SW3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J6 |
| 1 | WE-TVS-82400102 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
Similar boards
- 6 layers50 × 75 mm

- 4 layers35.6 × 44.5 mm

- 4 layers128.5 × 40 mm

Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 6 layers107 × 68 mm

Cm4-baseboard
antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout
516 parts36Apache-2.0 - 8 layers85 × 55 mm

- 4 layers46.1 × 45.6 mm

Cameraboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
95 parts15 - 4 layers112 × 56 mm

Sample020-poe usb c pd converter
tscircuit/dataset-srj24
Ten production-oriented KiCad boards converted to Simple Route JSON
276 parts - 4 layers29 × 54.4 mm

ESP32-S3-Breakout
eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module
34 parts10MIT
Questions
How big is the Camera control board PCB?
It measures 90 × 96 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Camera control board use?
97 parts, built around the IS42S32800J-7TLI, XC6210B332MR, CAS-120TA and MPZ1608S181ATAH0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Camera control board KiCad files?
From the cmu-argus-2/Avionics-Cameraboard repository on GitHub, at the commit this page was made from: the board is camera-control-board.kicad_pcb and its schematic camera-control-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Camera control board design in my own project?
Its repository states no licence, so its author keeps all rights: ask cmu-argus-2 before reusing the design.