
Thermocouple
Miceuz/thermocouple-modbus
Thermocouple frontend accessible via industrial modbus protocol

This is a breakout that attaches to the LCD Adapter board with a 34 pin ribbon cable and IDC connectors.
Chip io breakout is an open-source printed circuit board by cmnybo, from the cmnybo/chip_io_breakout repository on GitHub. It is a 2-layer board of 59.7 × 35.6 mm with 26 parts on 44 nets, routed with 405 tracks and 18 vias.
It is built around the MCP6L01-E/OT. Its parts include 12 connectors, 9 capacitors, 3 ICs and 1 inductor. It belongs with the interfaces and adapters boards of this library.
This is a breakout that attaches to the LCD Adapter board with a 34 pin ribbon cable and IDC connectors.
The original design files for this board were created in KiCAD.
There are PDF copies of the schematic, PCB layout, and bill of materials in the "pdf" directory.
The "gerber" directory contains all of the files needed to have some boards made.
The device tree overlay and example python program are in the "source" directory.


This project is open source hardware.
The hardware design files are licensed under a Creative Commons Attribution-ShareAlike license.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1µF | capacitor_smd:C_0402 | C1, C6, C7, C8, C9 |
| 2 | 10µF | capacitor_smd:C_0805 | C3, C4 |
| 2 | 1µF | capacitor_smd:C_0603 | C2, C5 |
| 2 | I2C | Pin_Headers:Pin_Header_Straight_1x04 | P3, P5 |
| 1 | 100µH | capacitor_smd:C_1210 | L1 |
| 1 | Analog | Pin_Headers:Pin_Header_Straight_2x08 | P2 |
| 1 | Digital | Pin_Headers:Pin_Header_Straight_2x08 | P1 |
| 1 | GPIO | w_conn_strip:vasch_strip_17x2 | P13 |
| 1 | Jumper_NC_Small | resistor_smd:R_0603 | JP1 |
| 1 | MAX11629 | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | IC1 |
| 1 | MAX5702 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | IC2 |
| 1 | MCP6L01 | TO_SOT_Packages_SMD:SOT-23-5 | IC3 |
| 1 | Power | Pin_Headers:Pin_Header_Straight_1x06 | P14 |
| 1 | SPI2 | Pin_Headers:Pin_Header_Straight_1x06 | P7 |
| 1 | SPI3 | Pin_Headers:Pin_Header_Straight_1x06 | P8 |
| 1 | SPI4 | Pin_Headers:Pin_Header_Straight_1x06 | P9 |
| 1 | SPI5 | Pin_Headers:Pin_Header_Straight_1x06 | P10 |
| 1 | SPI6 | Pin_Headers:Pin_Header_Straight_1x06 | P11 |
| 1 | SPI7 | Pin_Headers:Pin_Header_Straight_1x06 | P12 |

Miceuz/thermocouple-modbus
Thermocouple frontend accessible via industrial modbus protocol


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
It measures 59.7 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the MCP6L01-E/OT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cmnybo/chip_io_breakout repository on GitHub, at the commit this page was made from: the board is CHIP_IO_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cmnybo before reusing the design.