2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers53.3 × 94 mm
SR Design1
cmitchell716/Design1Proj21- Size
- 53.3 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 38
- Pads
- 78
- Tracks, vias
- 153, 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Oct 2021
- Updated
- 2 Dec 2021
Overview
SR Design1 is an open-source printed circuit board by cmitchell716, from the cmitchell716/Design1Proj2 repository on GitHub. It is a 2-layer board of 53.3 × 94 mm with 17 parts on 38 nets, routed with 153 tracks and 12 vias.
It is built around the ARDUINO UNO R3. Its parts include 5 resistors, 4 connectors and 3 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDesign1Proj2
This repository holds the source code for ECEN 4013 Group 2 Project 2. The PCB and Case directories hold the files required for each component respectively. The headers directory have the modified header files in order to save memory. Sketches hold all code run on the arduino, project_full is the final sketch used in the demonstration. All others test individual components or other related activities.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LED | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | L1, L2, L3 |
| 3 | PWR | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | AUX1, AUX2, P1 |
| 3 | R227 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | BT (UART +) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | GPS (UART) | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J2 |
| 1 | IMU (I2C) | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J1 |
| 1 | PWR | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Batt1 |
| 1 | R2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | R5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | SD (SPI) | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J4 |
Questions
How big is the SR Design1 PCB?
It measures 53.3 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SR Design1 use?
17 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SR Design1 KiCad files?
From the cmitchell716/Design1Proj2 repository on GitHub, at the commit this page was made from: the board is PCB/Files/SR Design1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SR Design1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cmitchell716 before reusing the design.
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
