

LogicBoard tht2
design files for the gametank hardware implementation
- Size
- 177.8 × 152.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 147
- Nets
- 346
- Pads
- 1,379
- Tracks, vias
- 5,644, 1,492
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Dec 2020
- Updated
- 14 Oct 2026
Overview
LogicBoard tht2 is an open-source printed circuit board by clydeshaffer, from the clydeshaffer/gametank repository on GitHub. It is a 4-layer board of 177.8 × 152.4 mm with 147 parts on 346 nets, routed with 5,644 tracks and 1,492 vias.
It is built around the MCP100-475DI/TO, 74HC163D and 74HC238D, with the CD40103BD, HDL26-SL-B and TX24-40R-12ST-H1E among its other parts. Its parts include 62 capacitors, 24 ICs, 8 resistors, 2 connectors and 1 diode.
Main components
7MCP100-475DI/TO
TO-92-3-40℃~+85℃@(TA) 1 150ms 4.625V Active Low Push-pull Simple Reset/Power-On Reset TO-92-3 Supervisor and Reset ICs ROHSMicrochip TechnologySupervisor And Reset ICs74HC163D
SO-16-40℃~+125℃ 1 16ns@6V,50pF 2V~6V 4 500mW 55MHz 74HC Divide-by-2 Reset function、Cascade counter、Synchronous counting Rising Edge Synchronous Synchronous Up Counter SO-16 Counters, Dividers ROHSNexperiaCounters / Dividers74HC238D
SOP-16SOP-16 Signal Switches, Multiplexers, Decoders ROHSMDDSignal Switches, Multiplexers, DecodersCD40103BD
CDIP-16-55℃~+125℃ 1 3V~18V 8 CD4000B Programmable divide ratio、Multi-mode counting Rising Edge CDIP-16 Counters, DividersTexas InstrumentsCounters, DividersHDL26-SL-B
弯插26P 3 Right Angle 弯插 D-Sub / VGA Connectors ROHSADAM TECHD-Sub / VGA ConnectorsTX24-40R-12ST-H1E
插件,P=1.27mmBoard-To-Board And Backplane ConnectorJAE ElectronicsTX25-40P-6ST-H1E
插件,P=1.27mm1.27mm 2 40P Gold Through Hole 插件,P=1.27mm Board-to-Board and Backplane Connector ROHSJAE ElectronicsBoard-To-Board And Backplane Connector
Parts
147| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | C-US025-024X044 | cpu-blitter-inputs:C025-024X044 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +30 |
| 15 | 0.1uF | cpu-blitter-inputs:C025-024X044 | C47, C48, C49, C50, C51, C52, C53, C54, C55, C56, C59, C60, C61, C62, C63 |
| 11 | 74573N | Package_DIP:DIP-20_W7.62mm | IC3, PAD1REG0, PAD2REG0, REG.COLOR0, REG.FLAGS0, REG.GX0, REG.GY0, REG.H0, REG.VX0, REG.VY0, REG.W0 |
| 9 | 74257N | Package_DIP:DIP-16_W7.62mm | BANKMUX0, GMUX0, GMUX1, GMUX2, GMUX3, VMUX0, VMUX1, VMUX2, VMUX3 |
| 9 | 74HC163 | Package_DIP:DIP-16_W7.62mm | GXH0, GXL0, GYH0, GYL0, U$6, VXH0, VXL0, VYH0, VYL0 |
| 5 | 3.3k | cpu-blitter-inputs:0207_10 | R1, R2, R3, R4, R5 |
| 4 | 7408N | Package_DIP:DIP-14_W7.62mm | CLK.SEQ0, IC1, IC7, IC12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 7400N | Package_DIP:DIP-14_W7.62mm | IC5, IC21, IC31 |
| 3 | 7404N | Package_DIP:DIP-14_W7.62mm | IC4, IC16, IC53 |
| 3 | 7474N | Package_DIP:DIP-14_W7.62mm | GAMEPAD_SELECTOR0, IC9, TRIGGER.INIT0 |
| 3 | PINHD-1X2 | cpu-blitter-inputs:1X02 | EXTRA_BUTTON_1, EXTRA_BUTTON_2, RESET_SW_HDR0 |
| 2 | 3,81/1,4 | cpu-blitter-inputs:3,81_1,4 | +5V0, GROUND0 |
| 2 | 3.3k | cpu-blitter-inputs:0204_7 | R6, R7 |
| 2 | 7432N | Package_DIP:DIP-14_W7.62mm | IC18, IC32 |
| 2 | 74AHC8541 | Package_DIP:DIP-20_W7.62mm | GXFLIPPER0, GYFLIPPER0 |
| 2 | 74HC238 | Package_DIP:DIP-16_W7.62mm | BLIT_REG_SELECTOR0, WR_REG_DECODE0 |
| 2 | CD40103 | Package_DIP:DIP-16_W7.62mm | CTR.H0, CTR.W0 |
| 2 | M09-182 | cpu-blitter-inputs:182-009-MALE | PORT1, PORT2 |
| 1 | 150 | cpu-blitter-inputs:0204_7 | R16 |
| 1 | 7407N | Package_DIP:DIP-14_W7.62mm | IC54 |
| 1 | 74139N | Package_DIP:DIP-16_W7.62mm | TOPDECODER0 |
| 1 | 7430N | Package_DIP:DIP-14_W7.62mm | IC20 |
| 1 | 74640N | Package_DIP:DIP-20_W7.62mm | BLIT_BUS_SWITCH0 |
| 1 | 7486N | Package_DIP:DIP-14_W7.62mm | SEQGEN_XOR0 |
| 1 | AS6C4008 | Package_DIP:DIP-32_W15.24mm | U$4 |
| 1 | CPOL-USE2.5-6 | cpu-blitter-inputs:E2,5-6 | C58 |
| 1 | Conn_01x26_Socket | connector:HDL26-SL-B | J1 |
| 1 | GT_CART3GT_SLOT | cpu-blitter-inputs:SLOT36 | U$3 |
| 1 | LED5MM | cpu-blitter-inputs:LED5MM | LED1 |
| 1 | MCP100-475D | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | OSCILLATORMODULEDIL14 | cpu-blitter-inputs:CRYSTAL800MIL | U$2 |
| 1 | SRAM_32K | Package_DIP:DIP-28_W7.62mm | U$5 |
| 1 | TX24-40R-12ST-H1E | cpu-blitter-inputs:CON40_2X20_MU_TX24_JAE | AUDIOSLOT0 |
| 1 | TX25-40P-6ST-H1E | cpu-blitter-inputs:CON40_2X20_MU_TX25_JAE | J2 |
| 1 | VIA | Package_DIP:DIP-40_W15.24mm | U2 |
| 1 | W65C02SP | Package_DIP:DIP-40_W15.24mm | U1 |
More from clydeshaffer/gametank
12- 4 layers120 × 98 mm

- 6 layers177.8 × 168.9 mm

LogicBoard smt
clydeshaffer/gametank
design files for the gametank hardware implementation
225 parts150 - 4 layers177 × 152.1 mm

- 4 layers177.8 × 152.4 mm

Cpu blitter inputs
clydeshaffer/gametank
design files for the gametank hardware implementation
145 parts150 - 4 layers177 × 152.1 mm

- 4 layers177.8 × 127 mm

- 4 layers89 × 93 mm

- 4 layers89 × 93 mm

- 2 layers99.1 × 40.6 mm

- 4 layers89 × 93 mm

- 2 layers120 × 98 mm

- 2 layers139.7 × 57.1 mm

Similar boards
- 2 layers160 × 100 mm

PLL AM OSC 1 7
Gloeidraad/AMFM-modulator-with-ESP32-module
This is an MP3 player, Web-radio player, Bluetooth player, and simple waveform generator, based on an ESP32 module. The output is connected to a simple FM/AM modulator.
198 parts - 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers208 × 110 mm

- 2 layers101.6 × 53.3 mm

- 2 layers88.3 × 97.8 mm

Starter
L0czek/rakieta
The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.
45 parts - 2 layers

BreadBin
c0pperdragon/BreadBin
A CPU made of 7400 logic on breadboards - inside a bread bin ;-)
45 parts18 - 2 layers335 × 250 mm

- 4 layers220 × 170 mm

Arpeggiator
EwoudVV/arpeggiator
12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case
360 parts3
Questions
How big is the LogicBoard tht2 PCB?
It measures 177.8 × 152.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LogicBoard tht2 use?
147 parts, built around the MCP100-475DI/TO, 74HC163D, 74HC238D and CD40103BD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LogicBoard tht2 KiCad files?
From the clydeshaffer/gametank repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/LogicBoard_tht2/LogicBoard_tht2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LogicBoard tht2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask clydeshaffer before reusing the design.