2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
2 layers96.2 × 51.4 mm
Barehub
cloudglides/barehubA very very cool minimal USB hub featuring 1 USB-C in, 4 USB-A out, small PCB, fast USB 2.0.
- Size
- 96.2 × 51.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 44
- Pads
- 156
- Tracks, vias
- 472, 58
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Feb 2026
- Updated
- 23 Feb 2026
Overview
Barehub is an open-source printed circuit board by cloudglides, from the cloudglides/barehub repository on GitHub. It is a 2-layer board of 96.2 × 51.4 mm with 36 parts on 44 nets, routed with 472 tracks and 58 vias.
It is built around the FE1.1S and SMF05CT1G. Its parts include 12 capacitors, 6 resistors, 6 ICs, 5 connectors and 1 diode.
Main components
2README
README.md
BAREHUB
BUILD!(not yet) • Onshape timeline
A very very cool minimal USB hub featuring 1 USB-C in, 4 USB-A out, small PCB, fast USB 2.0.
3D Case
PCB / Schematic
Build Instructions
To assemble the BAREHUB PCB:
- Apply solder paste to the pads of the PCB.
- Place all components (FE1.1S IC, USB ports, capacitors, etc.) onto their pads.
- Use a hotplate(reccomended) or hot-air gun to reflow the solder paste and solder components down.
- Inspect solder joints and touch up any misaligned components(dont burn em duh) if needed.
License
This project is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike style license with commercial permission:
- You are free to copy, modify, and sell products based on this design.
- You must credit "BAREHUB by cloudglides" wherever the design is used.
- Derivatives are allowed and can be sold, but attribution is required.
In short: copy, earn, remix, but always credit the original creator.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C7, C8 |
| 5 | SMF05CT1G | diode_maybe:SOT65P210X110-6N | U2, U3, U4, U5, U6 |
| 4 | USB_A | Connector_USB:USB_A_Molex_105057_Vertical | J2, J3, J4, J5 |
| 2 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_1206_3216Metric | C11, C12 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 1 | 0.1 µF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 12Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.7kΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 330Ω | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | FE1.1s | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J6 |
The 32 most common of 36 parts.
Questions
How big is the Barehub PCB?
It measures 96.2 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Barehub use?
36 parts, built around the FE1.1S and SMF05CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Barehub KiCad files?
From the cloudglides/barehub repository on GitHub, at the commit this page was made from: the board is pcb_kicad/barehub.kicad_pcb and its schematic pcb_kicad/barehub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Barehub design in my own project?
Its repository states no licence, so its author keeps all rights: ask cloudglides before reusing the design.
Similar boards
- 2 layers70 × 65 mm
Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers285.1 × 94.6 mm
YM60JIS PCB
ymkn/YM60JIS
A JIS layout 60% hot swappable custom mechanical keyboard PCB powered by RP2040.
173 parts10MIT - 4 layers88 × 58 mm
- 2 layers42 × 98.1 mm
- 2 layers285.1 × 94.6 mm
YuTofu PCB
ymkn/YuTofu
YuTofu is an unofficial compatible PCB for the well-known custom keyboard Tofu60 2.0.
169 parts5MIT - 2 layers228.8 × 76.2 mm
- 2 layers285.1 × 94.6 mm
