

Shutter current limit
Config files for my GitHub profile.
- Size
- 99.5 × 99.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 25
- Pads
- 109
- Tracks, vias
- 407, 0
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 May 2021
- Updated
- 2 May 2026
Overview
Shutter current limit is an open-source printed circuit board by Clarkeyeager, from the Clarkeyeager/Clarkeyeager repository on GitHub. It is a 2-layer board of 99.5 × 99.5 mm with 48 parts on 25 nets, routed with 407 tracks and 0 vias.
It is built around the BS170, 70HF120 and 70HFR120. Its parts include 15 resistors, 14 diodes, 6 transistors, 4 connectors and 1 capacitor.
Main components
3Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4001 | Shutter_current_limit_parts:1N4001 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 7 | 10K | Shutter_current_limit_parts:Resistor verticle | R1, R2, R9, R10, R12, R13, R15 |
| 6 | BS170 | Shutter_current_limit_parts:BS170 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | ~ | Shutter_current_limit_parts:Conn_01x02_PWR | J1, J2, J3, J4 |
| 3 | 100K | Shutter_current_limit_parts:Resistor verticle | R6, R11, R14 |
| 2 | ~ | Shutter_current_limit_parts:RLY_Conn_01x03 | K_cont1, K_cont2 |
| 2 | ~ | Shutter_current_limit_parts:K_coil | K_coil1, K_coil2 |
| 2 | ~ | Shutter_current_limit_parts:Test Point | TP1, TP2 |
| 1 | 0.1 ohm 25W | Shutter_current_limit_parts:Resistor_0.10_ohm_25W | R7 |
| 1 | 1.8K | Shutter_current_limit_parts:Resistor verticle | R4 |
| 1 | 100 Ohm | Shutter_current_limit_parts:POT | RV1 |
| 1 | 100uf | Shutter_current_limit_parts:100Uf 35V | C1 |
| 1 | 20K | Shutter_current_limit_parts:Resistor verticle | R3 |
| 1 | 220 ohm | Shutter_current_limit_parts:Resistor verticle | R5 |
| 1 | 30K | Shutter_current_limit_parts:Resistor verticle | R8 |
| 1 | 70HF120 | Shutter_current_limit_parts:diode_70HF120 | D13 |
| 1 | 70HFR120 | Shutter_current_limit_parts:diode_70HFR120 | D14 |
| 1 | ~ | Shutter_current_limit_parts:LM358 | U1 |
Similar boards
- 2 layers21.1 × 26.9 mm

- 2 layers94.6 × 46.1 mm

- 2 layers97.1 × 97 mm

- 2 layers121 × 68 mm

Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers167.6 × 97.5 mm

AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
142 parts88MIT - 2 layers70 × 55 mm

- 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 2 layers71.1 × 24.1 mm

Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57
Questions
How big is the Shutter current limit PCB?
It measures 99.5 × 99.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shutter current limit use?
48 parts, built around the BS170, 70HF120 and 70HFR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shutter current limit KiCad files?
From the Clarkeyeager/Clarkeyeager repository on GitHub, at the commit this page was made from: the board is Shutter controler/Shutter current limit/Shutter current limit.kicad_pcb and its schematic Shutter controler/Shutter current limit/Shutter current limit analysis/Shutter current limit analysis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shutter current limit design in my own project?
Its repository states no licence, so its author keeps all rights: ask Clarkeyeager before reusing the design.