2 layers

Apoce

APOCE : Arduino Pilote pour Optimiser la gestion de Consommation Electrique

Copper layers: 2
Thickness: 1.6 mm
Parts: 38
Nets: 58
Pads: 122
Tracks, vias: 0, 0
Routed: Not yet
KiCad: KiCad 8.0 (file 20240108)
Created: 27 May 2024
Updated: 13 Jan 2025

Overview

Apoce is an open-source printed circuit board by ckl67, from the ckl67/apoce repository on GitHub. It is a 2-layer board with 38 parts on 58 nets.

It is built around the IRM-05-5. Its parts include 12 resistors, 12 diodes, 5 connectors, 4 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

IRM-05-5
DIP,45.7x25.4mm0.1W 120V~430V 1A 200mVp-p 21.5mm 25.4mm 3kV 45.7mm 5V 5W 71% 85VAC~305VAC AC/DC-DC Short Circuit Protection、Over Current Protection、Overvoltage protection ±2.5% DIP,45.7x25.4mm Power Module/Power Supply ROHSMWAC-DC Power Modules

README

README.md

/* ================================================================= Pilote Arduino pour optimiser la gestion de consommation électrique Christian Klugesherz Date : 12 janvier 2025 --> Nouvelle approche avec double fonction de boutons

text

Le schéma de la carte se trouve dans le répertoire Board
La simulation se trouve sur
https://www.tinkercad.com/things/i7El4JjrINq-pilote-contacteur
L'Arduino Nano est basée sur l'ATmega328

Code sous github : https://github.com/ckl67/apoce

ATTENTION:
===========
	Il est impératif de configurer la partie "Configuration" ci-dessous !
	
Principe
=========
Entrée :
  * Signal Jour/Nuit - J/N
  * Signal Soleil - SOL
Sortie :
  * Signal pour piloter contacteur Chauffe Eau 1 - CA1
  * Signal pour piloter contacteur Chauffe Eau 2 - CA2
  * Signal pour piloter contacteur Chargement Voiture - CV
Bouton :
  * BoutonJN --> Permet aussi de forcer CA1
  * BoutonSOL--> Permet aussi de forcer CA2
  * BoutonAUTO--> Permet aussi de forcer V
Modes :
  Dans le principe, un changement de mode, va re-initialiser le compteur d'armement

Les Modes disponibles :

text

  -------------------------------------------
  * Mode JN : Jour-Nuit --> Led : Bleue Allumée
  --------------------------------------------
 Si ModeArm = 0
    Si signal J/N = 1
        Basculement entre pilotage "CA1" puis "CA2" 
 Si ModeArm = 1 
    Si signal J/N = 1
        Basculement entre pilotage "CA1" puis "CA2" puis "CV"  
	
Si signal J/N = 0
      Pas de pilotage
	  
  -------------------------------------------
  * Mode SOL : Soleil --> Led Orange Allumée
  --------------------------------------------
Si ModeArm = 0
    Si signal SOL = 1
      Basculement entre pilotage "CA1" puis "CA2"
  Si ModeArm = 1 
    Si signal SOL = 1
      Basculement entre pilotage "CA1" puis "CA2" puis "CV"
Si SOL = 0
      Pas de pilotage

Parts

Qty	Value	Footprint	References
8	1,5K	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1, R4, R5, R6, R10, R11, R12, R13
2	10K	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R3, R9
2	470	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R2, R8
2	4N35	Package_DIP:DIP-6_W7.62mm_LongPads	U1, U2
2	IRM-05-5	Converter_ACDC:Converter_ACDC_MeanWell_IRM-05-xx_THT	PS1, PS2
2	Jaune	LED_THT:LED_D5.0mm	D3, D9
1	Arduino_Nano_v3.x	Module:Arduino_Nano	A1
1	ButArmV	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	SW4
1	ButModeAuto	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	SW3
1	ButModeJN	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	SW1
1	ButModeSol	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	SW2
1	Jour/Nuit	TerminalBlock:TerminalBlock_bornier-2_P5.08mm	J4
1	LED-CA1-Vert	LED_THT:LED_D5.0mm	D4
1	LED-CA2-Vert	LED_THT:LED_D5.0mm	D5
1	LED-V-Vert	LED_THT:LED_D5.0mm	D6
1	LedArmV-Blanc	LED_THT:LED_D5.0mm	D13
1	LedModeAuto-Rouge	LED_THT:LED_D5.0mm	D12
1	LedModeJN-Bleu	LED_THT:LED_D5.0mm	D10
1	LedModeSol-Orange	LED_THT:LED_D5.0mm	D11
1	Red	LED_THT:LED_D5.0mm	D2
1	Relais	TerminalBlock:TerminalBlock_Xinya_XY308-2.54-6P_1x06_P2.54mm_Horizontal	J5
1	Rouge	LED_THT:LED_D5.0mm	D8
1	Solaire	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal	J2
1	Test J/N	TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal	J3
1	Test Soleil	TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal	J1
1	Vert Alim	LED_THT:LED_D5.0mm	D1

Questions

What parts does the Apoce use?

38 parts, built around the IRM-05-5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Apoce KiCad files?

From the ckl67/apoce repository on GitHub, at the commit this page was made from: the board is apoce board/apoce.kicad_pcb and its schematic apoce board/apoce.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Apoce design in my own project?

Its repository states no licence, so its author keeps all rights: ask ckl67 before reusing the design.

Category and platform

AVR (ATmega, ATtiny)

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/ckl67-apoce" title="Apoce in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/ckl67-apoce.jpg" alt="Apoce" width="1200" height="900">

A picture that opens the board, for a README

[![Apoce](https://pcbkit.io/embed/boards/ckl67-apoce.jpg?size=s)](https://pcbkit.io/boards/ckl67-apoce)

Source

Repository: ckl67/apoce
Board file: apoce board/apoce.kicad_pcb
Commit: c616151
Licence: Not stated

Similar boards

2 layers120 × 67 mm
Silvia pid board
haydenridd/silvia-pid-board
The following outlines: - Board circuit design - Hookup/wiring guide - Board mounting - BOM/Fabrication info
39 parts10MIT
2 layers126 × 57 mm
Mini Oven Controller
MAWoodMain/ESP-Reflow-Oven
A retro fit of a Lidl middle aisle mini oven into a home reflow oven
46 parts2MIT
2 layers51.5 × 92 mm
Ecoport bridge v1
jrowe88/ecoport-bridge
CTA-2045 (EcoPort) bridge for a Rinnai REHP65 heat pump water heater
74 parts1AGPL-3.0
2 layers250 × 100 mm
Iroutlet
bgs72/iroutlet
The project consists of three major folders:
66 parts
2 layers55 × 96 mm
MrReflow
C3MA/MrReflow
To achieve that, readings from a thermocouple are used for closed loop temperature control of the target board. The controller does it's best to follow a preconfigured temperature profile for a particular SMT soldering.
28 partsGPL-3.0
2 layers142.2 × 106.7 mm
SwitchFoil
falue/rebekkaSwitchFoil
This repo is using a HLK-LD2450 microwave human presence sensor and a Sparkfun Thing Plus. This uses Micropython. See below for instructions to set it up.
31 parts
2 layers54.5 × 104.5 mm
ReflowOven
gevanisko/ReflowOven
Contains schematics, design and code for a toaster oven based solder reflow oven
17 parts
2 layers212 × 84 mm
Eurorack psu
ghosty141/eurorack-psu

40 partsCERN-OHL-S-2.0