2 layers80 × 100 mm
Mfos wall wart eurorack psu
ckarcz/electronics
Electronics Circuits (Synth, Guitar, Video, etc)
50 partsMIT
2 layers55 × 100 mm
Synth prototyping pcb
ckarcz/electronicsElectronics Circuits (Synth, Guitar, Video, etc)
- Size
- 55 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 6
- Pads
- 692
- Tracks, vias
- 106, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2024
- Updated
- 31 Jul 2024
Overview
Synth prototyping pcb is an open-source printed circuit board by ckarcz, from the ckarcz/electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 100 mm with 82 parts on 6 nets, routed with 106 tracks and 0 vias.
It belongs with the audio and music boards of this library.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3_DIN965_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | M1, M1, M1, M1 |
| 1 | +12V | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP3 |
| 1 | +5V | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1 |
| 1 | -12V | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP4 |
| 1 | CV | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP5 |
| 1 | Conn_02x16_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | GATE | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP6 |
| 1 | GND | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP2 |
The 11 most common of 82 parts.
Questions
How big is the Synth prototyping pcb PCB?
It measures 55 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Synth prototyping pcb use?
82 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Synth prototyping pcb KiCad files?
From the ckarcz/electronics repository on GitHub, at the commit this page was made from: the board is synth/synth-prototyping-pcb/kicad/synth-prototyping-pcb.kicad_pcb and its schematic synth/eurorack-power-bus/kicad/eurorack-power-bus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Synth prototyping pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ckarcz/electronics
3- 2 layers245 × 50 mm
- 2 layers44.5 × 39.5 mm
Similar boards
- 2 layers68 × 55.4 mm
- 2 layers271.8 × 78.7 mm
PCPI AppliCard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
82 parts446 - 2 layers57.2 × 60.3 mm
- 2 layers35.6 × 33 mm
Axp209 breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
82 parts253GPL-3.0 - 2 layers65 × 40 mm
Mdb slave esp32s3-sim7080g
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
82 parts190MIT - 2 layers83.5 × 66 mm
Open ed Rev.B
krikzz/open-ed
Open-ED is a very simple and cheap open source Genesis/Megadrive cartridge. The cartridge does not have its own processor or FPGA, it is built in the old school style using only memory and discrete logic.
82 parts169MIT - 2 layers46.3 × 90.7 mm
- 2 layers97.1 × 97 mm
