4 layers85 × 54 mm
2 layers46.3 × 90.7 mm
MsiSDR
11tools/msiSDR168A SDR PCB project base on msi2500 and msi001
- Size
- 46.3 × 90.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 63
- Pads
- 321
- Tracks, vias
- 874, 79
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Feb 2019
- Updated
- 2 Dec 2020
Overview
MsiSDR is an open-source printed circuit board by 11tools, from the 11tools/msiSDR repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 46.3 × 90.7 mm with 82 parts on 63 nets, routed with 874 tracks and 79 vias.
It is built around the MSI001, MSI2500 and AP7313-30SAG, with the RT9193-28GB and BAV99LT1G among its other parts. Its parts include 42 capacitors, 11 connectors, 8 resistors, 6 inductors and 4 ICs. It belongs with the radio and wireless boards of this library.
Main components
5MSI001
QFN-40(6x6)QFN-40(6x6) RF Misc ICs and Modules ROHSMiricsModulesMSI2500
QFN-32-EP(5x5)QFN-32-EP(5x5) RF Misc ICs and Modules ROHSMiricsModules
AP7313-30SAG
SOT-23-40℃~+85℃@(Ta) 1 150mA 300mV@(150mA) 3V 65dB@(100Hz) 65uA 6V Fixed Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RT9193-28GB
SOT-23-5-40℃~+85℃@(Ta) 1 100uVrms 130uA 2.8V 300mA 300mV@(300mA) 5.5V 50dB@(10kHz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBAV99LT1G
SOT-23-65℃~+150℃@(Tj) 1 Pair Series Connection 1.25V@150mA 100V 1uA@100V 215mA 2A 6ns SOT-23 Switching Diodes ROHSonsemiSwitching Diodes
README
README.mdthis is an Software Define Radio receiver PCB project base on msi2500 and msi001. use kicad to view it
这是一个基于msi2500 和 msi001的软件无线电PCB工程项目， 使用kiCAD浏览此工程
如果需要PCB打样，把gerber目录下的文件发给PCB加工厂即可
Send gerbar files to PCB factory . you'd better to use SMT
建议叫工厂SMT贴片，手动焊接容易太多bug
软件使用SDRuno（选SDRPlay）
software compatible with SDRplay
使用效果
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10nF | Capacitors_SMD:C_0603 | C1, C11, C12, C13, C14, C15, C19, C20, C21, C24, C25, C26, C42 |
| 8 | 10uF | Capacitors_SMD:C_0805 | C2, C3, C4, C5, C7, C36, C37, C38 |
| 5 | 10K | Resistors_SMD:R_0603 | R4, R5, R6, R7, R8 |
| 3 | 1uF | Capacitors_SMD:C_0805 | C6, C8, C18 |
| 3 | 330nH | Inductors_SMD:L_0805 | L2, L3, L6 |
| 2 | 100nF | Capacitors_SMD:C_0603 | C16, C17 |
| 2 | 160pF | Capacitors_SMD:C_0603 | C31, C33 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C9, C10 |
| 2 | 1UF | Capacitors_SMD:C_0805 | C39, C41 |
| 2 | 56pF | Capacitors_SMD:C_0603 | C29, C34 |
| 2 | BAV99LT1G | TO_SOT_Packages_SMD:SOT-23 | D1, D2 |
| 1 | 100uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C35 |
| 1 | 150nH | Inductors_SMD:L_0805 | L5 |
| 1 | 1nF | Capacitors_SMD:C_0603 | C28 |
| 1 | 220nH | Inductors_SMD:L_0805 | L1 |
| 1 | 22nF | Capacitors_SMD:C_0603 | C40 |
| 1 | 24MHZ | Crystals:Crystal_SMD_7050-4pin_7.0x5.0mm | Y2 |
| 1 | 24MHz | Crystals:Crystal_HC50_Vertical | Y1 |
| 1 | 270nH | Inductors_SMD:L_0805 | L4 |
| 1 | 3.9pF | Capacitors_SMD:C_0603 | C30 |
| 1 | 33nF | Capacitors_SMD:C_0603 | C23 |
| 1 | 390R | Resistors_SMD:R_0603 | R2 |
| 1 | 39pF | Capacitors_SMD:C_0603 | C32 |
| 1 | 470nF | Capacitors_SMD:C_0805 | C27 |
| 1 | 510R | Resistors_SMD:R_0603 | R1 |
| 1 | 512 | Resistors_SMD:R_0603 | R3 |
| 1 | 6800pF | Capacitors_SMD:C_0603 | C22 |
| 1 | AP7313-30SAG | TO_SOT_Packages_SMD:SOT-23 | U4 |
| 1 | GPIO0 | Connectors:Pin_d0.7mm_L6.5mm_W1.8mm_FlatFork | J2 |
| 1 | GPIO1 | Connectors:Pin_d0.7mm_L6.5mm_W1.8mm_FlatFork | J3 |
| 1 | GPIO2 | Connectors:Pin_d0.7mm_L6.5mm_W1.8mm_FlatFork | J4 |
| 1 | GPIO3 | Connectors:Pin_d0.7mm_L6.5mm_W1.8mm_FlatFork | J5 |
| 1 | LED | Diodes_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D5 |
| 1 | RT9193-28 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | SMA_0_30MHZ | sma:SMA_OPL_EM | J6 |
| 1 | SMA_30_60MHZ | sma:SMA_OPL_EM | J7 |
| 1 | SMA_UHF | sma:SMA_OPL_EMPTYHEAD | J9 |
| 1 | SMA_VHF1 | sma:SMA_OPL_EMPTYHEAD | J10 |
| 1 | SMA_VHF2 | sma:SMA_OPL_EMPTYHEAD | J8 |
| 1 | USB_OTG | Connectors:USB_Mini-B | J11 |
| 1 | VCC_GPIO | Connectors:Pin_d0.7mm_L6.5mm_W1.8mm_FlatFork | J1 |
| 1 | msi001 | Housings_DFN_QFN:QFN-40-1EP_6x6mm_Pitch0.5mm | U2 |
| 1 | msi2500 | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
The 76 most common of 82 parts.
Questions
How big is the MsiSDR PCB?
It measures 46.3 × 90.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MsiSDR use?
82 parts, built around the MSI001, MSI2500, AP7313-30SAG and RT9193-28GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MsiSDR KiCad files?
From the 11tools/msiSDR repository on GitHub, at the commit this page was made from: the board is msisdr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MsiSDR design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers99 × 69 mm
MSI001
ATmega8/kiterf
Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
170 parts25MIT - 2 layers28.4 × 29.7 mm
MicroSD Zelda FORO JLC FIX V2
CapnRon/gnw-zelda-microsd-kicad
Castellated-edge microSD interposer for the Game & Watch: The Legend of Zelda console mod scene — original KiCad artwork, CERN-OHL-S v2
29 parts2CERN-OHL-S-2.0 - 4 layers77 × 48.6 mm
NX ISD
Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.
116 parts2GPL-3.0 - 4 layers70.4 × 107.2 mm
- 6 layers55 × 40 mm
CM5-AI Cam CopperPilot
CopperPilot/CM5-AI-Cam-CopperPilot
A Raspberry Pi Compute Module 5 carrier for edge AI vision, in the CM5's own 55 × 40 mm footprint. 100 Ω MIPI and HDMI pairs, 90 Ω USB.
90 parts - 4 layers90 × 20 mm
- 2 layers134 × 80 mm
