2 layers40 × 30 mm
2 layers36.5 × 19.5 mm
Gc sp2
citrus3000psi/SD2SP2130Micro SD Card Adapter for Gamecube's Serial Port 2
- Size
- 36.5 × 19.5 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 3
- Nets
- 8
- Pads
- 23
- Tracks, vias
- 41, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 May 2019
- Updated
- 6 Nov 2019
Overview
Gc sp2 is an open-source printed circuit board by citrus3000psi, from the citrus3000psi/SD2SP2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 36.5 × 19.5 mm with 3 parts on 8 nets, routed with 41 tracks and 17 vias.
Its parts include 2 connectors and 1 capacitor. It belongs with the interfaces and adapters boards of this library.
README
README.mdSD2SP2
This PCB allows a MicroSD card to adapted into the serial port2 of the gamecube.
The PCB must be ordered in 1.2mm thickness. Surface finish must be ENIG at minimum. I recommened https://jlcpcb.com for PCB production
BOM:
C1: 0805 22u Capactior (10V Min) - DigiKey Part# 1276-6780-1-ND
J1: MicroSD Slot - DigiKey Part# WM6825CT-ND
Unassembled kits will be available for purchase at my webstore soon: https://shop.dansprojects.com
Special thanks to:
- MockyLock for the idea
- Extrems & emu_kidid for doing the real work needed to make this possible
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | .1 | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | Micro_SD_Card | gc_sp2:1050270001 | J1 |
| 1 | SerialPort | gc_sp2:SP2_FootPrint | P1 |
Questions
How big is the Gc sp2 PCB?
It measures 36.5 × 19.5 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Gc sp2 use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gc sp2 KiCad files?
From the citrus3000psi/SD2SP2 repository on GitHub, at the commit this page was made from: the board is V1.2a/gc_sp2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gc sp2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT