2 layers255.5 × 159.5 mm
2 layers
My Projects
cieuoc/openelective-8bitadder8 Bit full adder assignment. KiCAD and FreeCAD files
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 77
- Pads
- 245
- Tracks, vias
- 116, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Dec 2025
- Updated
- 9 Dec 2025
Overview
My Projects is an open-source printed circuit board by cieuoc, from the cieuoc/openelective-8bitadder repository on GitHub. It is a 2-layer board with 87 parts on 77 nets, routed with 116 tracks and 0 vias.
Its parts include 41 resistors, 24 diodes, 17 switches, 4 ICs and 1 connector.
README
README.mdAssignment: 8 bit full adder
-
Create a directory with your name
-
Inside it, 2 directories called Circuit, Enclosure
-
Place Kicad files and libraries inside Circuit
-
FreeCAD file FCstd and exported STL files inside Enclosure
-
Git add .
-
Git commit
-
Git push
-
Create PR
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 24 | LED | LED_THT:LED_D3.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 16 | SW_SPDT | assignment:ledswitch | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 8 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R33, R34, R35, R36, R37, R38, R39, R40 |
| 2 | 7483 | Package_DIP:SMDIP-16_W7.62mm | IC1, IC2 |
| 2 | 7486 | Package_DIP:DIP-14_W7.62mm | IC3, IC4 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R41 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW17 |
Questions
What parts does the My Projects use?
87 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the My Projects KiCad files?
From the cieuoc/openelective-8bitadder repository on GitHub, at the commit this page was made from: the board is danish/circuit/My Projects.kicad_pcb and its schematic Ajith N/CIRCUIT/full adder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the My Projects design in my own project?
Its repository states no licence, so its author keeps all rights: ask cieuoc before reusing the design.
More from cieuoc/openelective-8bitadder
4- 2 layers248.5 × 171 mm
FULL ADDER 2.0
cieuoc/openelective-8bitadder
8 Bit full adder assignment. KiCAD and FreeCAD files
87 parts - 2 layers225.5 × 125.5 mm
New project adder
cieuoc/openelective-8bitadder
8 Bit full adder assignment. KiCAD and FreeCAD files
87 parts - 2 layers252 × 172 mm
Full adder npv
cieuoc/openelective-8bitadder
8 Bit full adder assignment. KiCAD and FreeCAD files
87 parts
Similar boards
- 2 layers175.8 × 184.8 mm
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
87 parts2.6k - 2 layers58.2 × 38.1 mm
Usb sniffer
ataradov/usb-sniffer
Low-cost LS/FS/HS USB sniffer with Wireshark interface
87 parts1.3kBSD-3-Clause - 2 layers65 × 56 mm
- 2 layers57 × 111 mm
- 2 layers128.2 × 150.3 mm
- 2 layers88.9 × 80 mm
- 2 layers38.1 × 101.6 mm
- 2 layers68.6 × 53.3 mm
Arduino UNO R4 Minima
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
87 parts95WTFPL