6 layers55 × 55 mm
Astronaut
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
110 parts1MIT
4 layers40 × 40 mm
Satellite
ciborg971/KISSE-11A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
- Size
- 40 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 104
- Pads
- 391
- Tracks, vias
- 736, 101
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Aug 2026
- Updated
- 13 Sep 2026
Overview
Satellite is an open-source printed circuit board by ciborg971, from the ciborg971/KISSE-1 repository on GitHub, published under the MIT licence. It is a 4-layer board of 40 × 40 mm with 116 parts on 104 nets, routed with 736 tracks and 101 vias.
It is built around the RP2354A, LAN8651B1-E/LMX and SY8513FCC, with the AVRH10C221KT1R5YA8, ABM8-272-T3 and WS2812C-2020-V6 among its other parts. Its parts include 44 capacitors, 31 resistors, 8 ICs, 4 inductors and 3 connectors. It belongs with the RP2350 boards of this library.
Main components
12
RP2354A
QFN-60(7x7)150MHz 32 Bit ARM Cortex-M33 Built-in+External Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-60(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
LAN8651B1-E/LMX
VQFN-32(5x5)-40℃~+125℃ 10BASE-T1S 3.3V SPI Wake-up function、Power-on reset、Low-power mode、SupportIEEE1588、SupportTSN Yes VQFN-32(5x5) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
SY8513FCC
SOP-8-EP-40℃~+85℃@(TA) 1 100kHz~500kHz 100uA 3A 4.5V~100V Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHSSilergy CorpDC-DC Converters
AVRH10C221KT1R5YA8
04021.5pF 220V 400V 500mA 70V 7mJ 0402 Varistors ROHSTDKVaristors
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
WS2812C-2020-V6
SMD2020-4PSMD2020-4P RGB LEDs(Built-in IC) ROHSWorldsemiUncategorised
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
ABM10-25.000MHZ-D30-T3
SMD2520-4P-40℃~+85℃ 100Ω 10pF 25MHz ±20ppm ±30ppm SMD2520-4P Crystals ROHSAbraconCrystals
AOTA-B201610S3R3-101-T
0806115mΩ 2.1A 2.4A 3.3uH Molded inductor 0806 Molding Power Inductors ROHSAbraconPower InductorsAPH303020C100MP03
SMD,3x3mmSMD,3x3mm Molding Power Inductors ROHSAPVPower Inductors
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
DLW32MH201XK2L
SMD-4P,3.2x2.5mm-40℃~+125℃ 10MΩ 125V 2 200uH@0.1MHz 4.8Ω 50V 70mA SMD-4P,3.2x2.5mm Common Mode Filters ROHSMurataCommon Mode Filters
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C10, C12, C13, C28, C29, C30, C31, C33, C34, C35, C36, C37, C38, C44 +3 |
| 11 | 10K | Resistor_SMD:R_0402_1005Metric | R9, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 |
| 7 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP9, JP10, JP11, JP12, JP13 |
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C21, C22, C23, C24, C39, C40 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R13, R14, R15, R20, R21 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C15, C16, C18, C19 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C8, C41, C42, C43 |
| 4 | JO | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5, JP6, JP7, JP8 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | TP | TestPoint:TestPoint_Pad_D1.5mm | TP3, TP4, TP5, TP6 |
| 3 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R1, R6 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C11, C14 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C27, C32 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R10, R19 |
| 2 | 1uF/100V | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 22uF/25V | Capacitor_SMD:C_0805_2012Metric | C20, C25 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 49.9R | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | AVRH10C221KT1R5YA8 | lcsc:R0402 | U2, U3 |
| 2 | TS-1088-AR02016 | lcsc:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 0.1uF/100V | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 0.1uF/25V | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 105K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 12.4K 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 200K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 20K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | ABM10-25.000MHZ-D30-T3 | lcsc:CRYSTAL-SMD_4P-L2.5-W2.0-BL-B | X1 |
| 1 | ABM8-272-T3_C20625731 | lcsc:CRYSTAL-SMD_4P-L3.2-W2.5-BL | U5 |
| 1 | AOTA-B201610S3R3-101-T | lcsc:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L4 |
| 1 | APH303020C100MP03 | lcsc:IND-SMD_L3.0-W3.0_FTC303012D | L2 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BLM18KG331SN1D | lcsc:L0603 | L3 |
| 1 | DLW32MH201XK2L | lcsc:FILTER-SMD_4P-L3.2-W2.5-BL_DLW32SH510XK2L | L1 |
| 1 | LAN8651B1-E/LMX | lcsc:VQFN-32_L5.0-W5.0-P0.50-TL-EP3.6 | U1 |
| 1 | NCP1117ST33T3G | lcsc:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U6 |
| 1 | PTCFW-H22A-115 | lcsc:USB-C-SMD_GT-USB-7010E | USB1 |
| 1 | RP2354A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U7 |
| 1 | SY8513FCC | lcsc:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP3.1 | U4 |
| 1 | WS2812C-2020-V6 | lcsc:LED-SMD_4P-L2.2-W2.0-P1.00_WS2815C-2020-4P | U8 |
More from ciborg971/KISSE-1
4- 4 layers80 × 30 mm
Voisin
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
44 parts1MIT - 4 layers15 × 12 mm
CobDriver1A
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
8 parts1MIT - 2 layers20 × 15 mm
4positionStick
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
6 parts1MIT
Similar boards
- 2 layers20 × 110 mm
ComposerMIDICV
CopycatMusic/ComposerMIDICV
4 HP Eurorack USB/TRS MIDI-to-CV module: RP2354A firmware, KiCad hardware and v1.0 manufacturing files.
87 parts2AGPL-3.0 - 4 layers49.1 × 54.3 mm
Rp2350-hdmi hexpansion
Corteil/rp2350-hdmi-hexpansion
RP2350 HDMI hexpansion for the EMF Tildagon badge -- mirrors the badge's display to a monitor over HSTX/DVI
57 parts2 - 4 layers50 × 50 mm
50x50 2 Layer
UC-Aerospace/Electrical-Tut-26
2026 Avionics tutorial example boards for UC Aerospace
86 parts - 2 layers58.2 × 60 mm
Inty FujiCard
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
78 parts142 - 4 layers76 × 54 mm
Pixelblaze battery backpack
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
112 parts1 - 4 layers82 × 55 mm
Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 2 layers99.8 × 99.9 mm
Baseboard
Lathe-Mariel/PCB_PY32E407START_baseboard
型式 | 数量 | アイテム ---|---|--- FH-2x25SG(10) | 2 | 2.54連結ピンソケット PH-2x5SG | 1 | 2.54ピンヘッダ FH-2x2SG | 2 | 2.54ピンソケット DTS-63-N-V-BLK | 1 | タクトスイッチ | 6 | Pmodソケット OSR50603C1E | 4 | SMD LED RC0603J220R | 4 | SMD 1608 220Ω…
91 partsMIT - 2 layers337 × 157 mm
Questions
How big is the Satellite PCB?
It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Satellite use?
116 parts, built around the RP2354A, LAN8651B1-E/LMX, SY8513FCC and AVRH10C221KT1R5YA8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Satellite KiCad files?
From the ciborg971/KISSE-1 repository on GitHub, at the commit this page was made from: the board is Electronic/Satellite/Satellite.kicad_pcb and its schematic Electronic/4positionStick/4positionStick.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Satellite design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).