christrotter/top-encoder-pcbTop encoders have a short mouse wheel encoder and two leds.
Top encoder pcb is an open-source printed circuit board by christrotter, from the christrotter/top-encoder-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 17 × 24 mm with 20 parts on 15 nets, routed with 169 tracks and 19 vias.
It is built around the AFC01-S12FCA-00. Its parts include 4 resistors, 4 ICs, 2 capacitors, 1 connector and 1 switch.
mk22 top encoders have a 5mm mouse wheel encoder and four leds.
This pcb is designed to fit inside the 30x15mm encoder wheel. Why? So we can shine leds up through the single-wall TPU covering, and so indicate what function the encoder is providing. It requires the use of 5mm mouse encoders - otherwise the 30mm diameter wheel is too small...and at 30mm, we're already pushing the boundaries of what packaging will allow.
There is a de-noise circuit thingy, inherited from here: https://github.com/christrotter/mouse-encoder-pcb
The FFC connector will hook into the mainboard's giant FFC - see schematic section for pinout.
| Designator | Footprint | Quantity | Value | LCSC Part # |
|---|---|---|---|---|
| C1, C2 | 0402 | 2 | 0.01uF | |
| P1 | FPC-SMD_AFC01-S12FCA-00 | 1 | AFC01-S12FCA-00 | C262661 |
| R1, R2 | 0402 | 2 | 330 | |
| R3, R4 | 0402 | 2 | 10k | |
| U1, U2, U3, U8 | LED-SMD_4P-L1.4-W1.4-TL | 4 | SK6805-EC14_C2909055 | C2909055 |
Uh, ignore the gold silk PLA - just using up rando spools for prototyping.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | SK6805-EC14_C2909055 | kicad-libraries:LED-SMD_4P-L1.4-W1.4-TL | U1, U2, U3, U8 |
| 2 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | **REF | kicad-libraries:awesome-logo | LOGO1 |
| 1 | AFC01-S12FCA-00 | kicad-libraries:FPC-SMD_AFC01-S12FCA-00 | P1 |
| 1 | RotaryEncoder | kicad-libraries:SW-TH_EC10EXXXXXXX | SW1 |
It measures 17 × 24 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the AFC01-S12FCA-00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the christrotter/top-encoder-pcb repository on GitHub, at the commit this page was made from: the board is top-encoder-pcb.kicad_pcb and its schematic top-encoder-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
Cherrytree56567/Creative-Pad
A simple Macropad which has hotswap switches with custom key binds.
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
Aightech/e-skin
A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
