
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Fork of darren-blum's S.H.A.D.O.W for MSE droids
MSEShadowUno is an open-source printed circuit board by ChristopherEdwards, from the ChristopherEdwards/SHADOW repository on GitHub. It is a 2-layer board of 68.8 × 53.6 mm with 10 parts on 51 nets, routed with 77 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
Introducing S.H.A.D.O.W. (Small Handheld Arduino Droid Operating Wand) MSE Edition A MSE droid control system based on DanF's Padawan, and Darren Blum's S.H.A.D.O.W. that uses a PS3 Move Navigation Controller
This is a fork of Darren Blum's S.H.A.D.O.W. system. It is specifically modified to support MSE (RC Car) Based Droids.
It is a slimmed down version of the original code base to only support what is used on these types of droids. If you are already familiar with S.H.A.D.O.W. then this fork will feel very familiar.
This sketch works on an Arduino MEGA ADK, or Arduino MEGA or Arduino UNO with a USB Shield
The sketch supports the following MP3 players:
Pin Assignment:
Sound Mapping: Note: when using L2 Throttle the L2 + and L1 + keystrokes still work, though they may not be very useful
Additional information for the original S.H.A.D.O.W. Sketch can be found in this thread on Asromech.net: http://astromech.net/forums/showthread.php?19298-S-H-A-D-O-W-Padawan-based-mini-PS3-Controller
All libraries distributed with original licenses as specified by the library. serMP3 library comes from: https://forum.arduino.cc/index.php?topic=148983.0
Thank you to:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Uno_Shield | Arduino:Arduino_Uno_Shield_No_ICSP | XA1 |
| 1 | Audio Out | Connectors:Stereo_Jack_3.5mm_Switch_Ledino_KB3SPRS | J7 |
| 1 | LOGO | MSEShadowUno:MSE-NOText-Normal | G*** |
| 1 | MDFly MP3 Trigger | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J1 |
| 1 | Motor | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | Power In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS1.5-2pol | J2 |
| 1 | Power Jumper | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | Servo | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | Sparkfun MP3 Trigger | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
The 9 most common of 10 parts.
It measures 68.8 × 53.6 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChristopherEdwards/SHADOW repository on GitHub, at the commit this page was made from: the board is MSEShadowUno/MSEShadowUno.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ChristopherEdwards before reusing the design.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI