Skip to the content
2 layers64.8 × 95.5 mmBlinds, the printed circuit board in 3D

My Smart Home hardware/firmware projects (2nd edition)

Size
64.8 × 95.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
36
Pads
82
Tracks, vias
118, 5
Pours
5
Routed
Yes
KiCad
KiCad 4
Created
5 Aug 2018
Updated
18 Nov 2018

Overview

Blinds is an open-source printed circuit board by chris-zen, from the chris-zen/homey repository on GitHub. It is a 2-layer board of 64.8 × 95.5 mm with 28 parts on 36 nets, routed with 118 tracks and 5 vias.

It is built around the ESP-12E and LB1909MC-BH. Its parts include 9 connectors, 4 resistors, 2 capacitors and 2 ICs. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.

Main components

2

README

relays-hw/README.md

Relays hardware

This project contains the hardware design for the controllers using relays.

All libraries, footprints and 3D models (a part from the standard ones comming with Kicad) have been included in the project to avoid missing dependencies in the future.

I also include plots for the board in case you just want to start building one without having to deal with Kicad.

Attributions

  • ESP8266 Kicad designs from here
  • RELAY_PE Kicad designs from here

License

Creative Commons Attribution 4.0 International License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Parts

28
QtyValueFootprintReferences
410kResistors_SMD:R_0805_HandSolderingR1, R3, R4, R5
3DCPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ2, J10, J12
2CH_PDPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ3, J11
2PE014F03footprints:relay_PERLY1, RLY2
1100nFCapacitors_SMD:C_0805_HandSolderingC1
1100uFCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC2
1ACConnectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polJ1
1DRIVEConnectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3polJ7
1ESP-12Efootprints:ESP-12E_SMDU1
1GPIO0Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ8
1LB1909MCfootprints:LB1909MCU2
1SERIALPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ9
1VTX-214-006VTX-214-006PS1

The 20 most common of 28 parts.

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 2 layers104.8 × 72.1 mmSST V2 4, the printed circuit board in 3D

    SST V2 4

    mcbittech/souliss-smart-thermostat-WiFi

    ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

    53 parts110GPL-2.0
  • 2 layers30 × 65 mmHardpass pcb, the printed circuit board in 3D

    Hardpass pcb

    girst/hardpass-passwordmanager-mirror-of-git.gir.st

    https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.

    34 parts101GPL-3.0
  • 2 layers82.5 × 22.4 mmWindow Sensor, the printed circuit board in 3D

    Window Sensor

    MakerMeik/Window-Sensor

    Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w

    19 parts67
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layers100 × 45 mmTranspOtterNG, the printed circuit board in 3D

    TranspOtterNG

    Jana-Marie/transpOtterNG

    Next Generation of TranspOtter.

    63 parts51

Questions

How big is the Blinds PCB?

It measures 64.8 × 95.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Blinds use?

28 parts, built around the ESP-12E and LB1909MC-BH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blinds KiCad files?

From the chris-zen/homey repository on GitHub, at the commit this page was made from: the board is relays-hw/blinds.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blinds design in my own project?

Its repository states no licence, so its author keeps all rights: ask chris-zen before reusing the design.